Panasonic DIGA DMR-ES15 - Manual (Page 8)

RQT8317
8
STEP 1 Connection
• Before connection, turn off all equipment and read the appropriate operating instructions.
• Select the connection pattern that matches your environment from patterns A-B. Confirm connections not listed below with your
dealer.
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
Make sure to use the pair of supplied RF coaxial cables
Use the pair of supplied RF coaxial cables only when you make connections to the unit through the RF IN and RF OUT terminals. Striping may
appear and disrupt images on the TV if you use different cables for connection.
Connecting a television
Connecting to a television with 21-pin Scart terminal
You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.
If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output
on this unit.
“AV1 Output” in the Setup menu (Ô page 40)
For Middle East and South Africa
VHF/UHF
RF IN
AUDIO IN
R L
VIDEO
IN
444
1 2 3
Television’s rear panel
This unit’s rear panel
Audio/Video cable
(included)
RF coaxial cable
(included)
To the aerial
Aerial
cable
To household mains socket
(AC 220 to 240 V, 50 Hz)
(AC 220 to 240 V, 50/60 Hz)
For Australia and N.Z.
For Asia, Middle East
and South Africa
AC mains lead (included)
Connect only after all other connections
are complete.
• Use the AC mains lead that matches the
socket for the area you live in.
For Middle East and South Africa
For Saudi Arabia
Other connections (Ô page 10)
RF coaxial
cable
(included)
Red White Yellow
Red White Yellow
Required setting