Panasonic DIGA DMR-ES15 - Manual (Page 42)

RQT8317
42
Resetting channel setting
Refer to the control reference on page 38.
You can add or delete channels, or change programme positions.
1
While stopped
Press [FUNCTIONS].
2
Press [e,r] to select “To Others” and
press [ENTER].
3
Press [e,r] to select “Setup” and
press [ENTER].
4
Press [e,r] to select “Tuning” and
press [q].
5
Press [e,r] to select “Manual” and
press [ENTER].
To delete a programme position
Press [e,r,w,q] to select a programme position and press
[A].
To add a blank programme position
Press [e,r,w,q] to select a programme position and press
[B].
To move a TV station to another programme position
1
Press [e,r,w,q] to select a programme position and press
[C].
2 Press [e,r] to select the new programme position to
which you want to assign the TV station and press
[ENTER].
After performing steps 1–5 (Ô left)
6
Press [e,r,w,q] to select a
programme position and press
[ENTER].
e.g.,
Press [e,r] to select an item and press [q].
Only for Asia, Middle East and South Africa
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
Manual
Auto-Setup Restart
TAB
ENTER
SELECT
RETURN
Manual Tuning
Pos Name Ch Pos Name Ch
Delete
Add
Move
1
2
3
4
4
2
5
8
10 5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 ENTER
RETURN
SELECT
ARD
ZDF
N3
HR3
BR3
B C A
To change detailed station settings
Pos To change the programme position in which the
TV stations are assigned
Press [e,r] or the numbered buttons to select the
number of the desired programme position and
press [ENTER].
Name To enter or change the name of a TV station
Press [e,r,w,q] to enter station name and press
[ENTER].
If the station name needs a blank space, select the
blank between “Z” and “ ”.
Channel To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [e,r] or the numbered buttons to enter the
channel number of the desired TV station.
Wait a few moments until the desired TV station has
been tuned.
After the desired TV station is tuned, press
[ENTER].
Fine Tuning To obtain the best tuning condition
Press [e,r] to adjust the best tuning condition
and press [ENTER].
• Press [q] to return to “Auto”.
Video
System To select the video system type
Press [e,r] to select “PAL” or “SECAM” if the
picture lacks colour, and press [ENTER].
Auto:
This unit automatically distinguishes PAL
and SECAM signals.
PAL: For receiving PAL signals.
SECAM: For receiving SECAM signals.
• This setting is also available when you select the
external input channel (AV1, AV2, AV3 or AV4) in
step 5. In order to record properly, make the
appropriate setting to match the connected
equipment.
Audio
Mode To select the audio reception type
If sound quality is poor, press [e,r] to select items
and press [ENTER].
BG: PAL B.G
I:
PAL I
DK: PAL D.K.K1
Mono To select the type of sound to be recorded
Press [e,r] to select “On” if the stereo sound is
distorted due to inferior reception conditions, or if
you want to record the normal (mono) sound during
a stereo, bilingual or NICAM broadcast, and press
[ENTER].
Australia and N.Z.
Pos
Name
Channel
Fine Tuning
RETURN : leave
Manual
Tuning
Mono
RETURN
SELECT
1
4
Auto
ARD
Off