Panasonic AV-HS400AN - Manual (Page 111)

111
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
IN/OUT Input Parameter Signal FS Mode
↓
AnaGain
1/15 Setting range IN1 to 8 On, Off  Normal, UC,
Auto, D by D
−30 to +30
Default value — On Normal 0
Output Parameter Signal Output Mode
↓
2/15 Setting range OUT1 to 6 PGM, PVW, AUX,
Multi, KEYOut  Normal, DC
Default value — — Normal
Ref Parameter Sync
↓
BBSetup GenLock
3/15 Setting range 
BBST, BBAD,
TRI, INT
0IRE, 7.5IRE Locked, UnLock
Default value BBST 7.5IRE —
OutPhs Parameter System H-Phase V-Phase
4/15 Setting range 0H, 1H −1320 to +1319 −100 to +100
Default value 1H 0 0
OSD Parameter OSD Select
5/15 Setting range On, Off PVW, Multi
Default value On PVW
Multi1 Parameter Split Pos Signal
6/15 Setting range 10Split, 4Split,
8Split 1 to 8
(1 to 4)
(1 to 6) IN1 to 8, FMEM1,
FMEM2, CBGD
Upper-L, Upper-R PGM, PVW, AUX,
KeyOut
Default value 10Split — —
Multi2 Parameter Frame Char Label Tally
7/15 Setting range LUM 0%, LUM 25%,
LUM 50%, LUM
75%, LUM100%, Off LUM 0%, LUM 25%,
LUM 50%, LUM
75%, LUM100%, Off On, Off Red, Red+GRN,
Off
Default value LUM 50% LUM 75% On Red+GRN
Multi3 Parameter Signal Type
↓
Name
8/15 Setting range IN1 to 8  Defalt, Preset,
User
Default value Defalt
Anci Parameter VAnci E.Audio
9/15 Setting range On, Off On, Off
Default value Off Off
DVIIn Parameter Signal Mode Scale Auto
↓
10/15 Setting range IN5 to 8 Dig, Ana Fit-V, Fit-H, Full Black, White, Init
Default value — Dig Fit-V Black
DVIPhs Parameter Signal ClkPhs H-Pos V-Pos
11/15 Setting range IN5 to 8 −16 to 15 −100 to 100 −100 to 100
Default value — 0 0 0
8. Setting menu table