Troubleshooting, Problem possible cause solution – Philips SC464 User Manual
Page 12
Problem
Possible cause
Solution
No sound on parent unit. Volume off or too low.
Turn VOLUME control (B-8) on
parent unit downwards.
Units out of range.
Move parent unit closer to baby
unit.
No connection
Parent unit out of range of
Move parent unit closer
between units.
tansmitted signal.
to baby unit.
Units are set to different
Set channel selection switches
channels.
(A-8, B-7) to the same
position on both units.
Interference or poor
Mobile or cordless phone(s)
Move phone(s) away from
reception.
too close to baby monitor.
baby monitor.
Interference from other
Switch both units to another
baby monitors in the
channel using the channel
neighborhood.
selection switch (A-8, B-7).
Battery power running low.
Replace batteries.
Transmitted signal is out of
Move parent unit closer
range; e.g. there are too many
to baby unit.
walls and/or ceilings between
baby unit and parent unit.
Parent unit located too close to
Move parent unit away
a window and picking up
from window.
interfering signals from other
appliances.
EN
Troubleshooting
12