Panasonic DX-600 - Manual (Page 124)

Receiving Documents via LAN
124
Your machine offers a choice to receive and print Internet email messages via LAN unattended or manually
when subscribing to a POP mail server.
Setting the POP Parameters
Set the parameters pertinent to the POP server (Fax Parameters No. 146 to 149).
No. 146 (POP TIMER): Enter the interval to check and retrieve email from the POP server (0 to 60 minutes).
If "0 minutes" is entered, the POP server is not checked for mail.
No. 147 (AUTO POP RCV): When there is mail to be retrieved from the POP server, your machine will
retrieve it and print the email unattended. If this parameter is set to "1:Invalid", the machine will not retrieve
it, but displays the number of mails on the POP server.
No. 148 (DEL POP RCV MAIL): Select whether the email is deleted from the POP server after it is retrieved
by your machine.
No. 149 (DEL POP ERR MAIL): Select whether to delete the email from the POP server when the file
attachment format is not supported.
To set the above POP parameters, follow the steps below.
Receiving Email from a POP Server
1
SET MODE (1-8)
ENTER NO. OR
∨ ∧
2
FAX PARAMETER(1-174)
NO.=❚
3
146 POP TIMER
3 min. (0-60)
4
Enter the desired download interval (0 to 60 minutes).
Ex:
If you make a mistake, press to erase the digit
and then re-enter the correct value.
146 POP TIMER
5 min. (0-60)
5
147 AUTO POP RCV
2:VALID
6
for “INVALID”
or
for “VALID”
147 AUTO POP RCV
2:VALID
7
4
1 4 6
0 5
CLEAR
1
2