Panasonic DX-600 - Manual (Page 60)

Programming or Retrieving Parameters via Email
60
This feature provides a convenient and an easy way to Update, Backup or Restore the Phone Book data
right from your PC by sending a text email message to your machine.
Your machine interprets the command that you enter in the "Subject" line of your email message and
performs one of the following functions, it Retrieves or Stores data into the Auto Dialler (Phone Book).
The two types of commands that can be entered in the "Subject" line of your email:
NOTE 1. To activate this feature, change the Fax Parameter No. 158 (PC REMOTE UPDATE) to "Valid".
(See page 83)
Using a PC to Update the Auto Dialler Remotely
1) To Store
data, type
: #set abbr(password)# : where the "password" is the Remote Password programmed in
your machine's User Parameters (i.e. 123456789).
You can program any known unused Auto Dialler location(s)
with this command for the first time, without having to Retrieve
the Phone Book data first. If the desired Auto Dialler location
already contains data, your machine will overwrite the existing
data, therefore, we recommend that you use the Retrieve
command below instead.
To edit existing Auto Dialler locations, refer to pages 66 to 67.
2) To Retrieve
data, type
: #get abbr(123456789)#