Panasonic DX-600 - Manual (Page 80)

Customizing Your Machine
80
Fax Parameter Table
031 INCOMPLETE FILE
SAVE
1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully transmitted.
2 Valid
032 COPY REDUCTION 1 Manual Selecting whether the machine performs the copy
reduction ratio automatically or manually.
Manual : The machine will prompt you for the Zoom ratio
(100% to 70%) when making copies.
Auto : The machine will automatically determine the
reduction ratio according to the length of the
original document.
2 Auto
034 ENERGY SAVER
MODE
1 Off To reduce the power consumption in standby, select either
Energy-Saver or Sleep mode and specify the Delay Time
(1 to 120 minutes) for the machine to enter into the
selected mode.
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
Off
: The unit will remain in standby
mode and consume more energy
than when in Energy-Saver or
Sleep modes.
Energy-Saver Mode : Saves energy by consuming less
power than when in standby mode
by turning off the fuser unit after
the specified time.
2 Energy-
Saver
035 DAYLIGHT TIME 1 Invalid Selecting whether the clock adjusts for Daylight Saving
Time automatically. The built-in clock will advance 1 hour
at 2:00 am on the first Sunday in April and fallback 1 hour
at 2:00 am on the last Sunday in October.
2 Valid
037 RCV TO MEMORY (----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO MEMORY).
When F8-5 is set to On, this parameter will not be shown
on the LCD display. (See page 170)
038 ACCESS CODE (----) Enter a 4-digit Access Code to secure the machine from
unauthorized use. (See page 168)
039 PIN CODE ACCESS 1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code. (See page 175)
2 Suffix
3 Prefix
042 CONF. POLLED FILE
SAVE
1 Invalid Selecting whether the machine saves the confidential
polled file even after the file is polled once.
2 Valid
043 PASSWORD-XMT 1 Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the
receiving station when transmitting. (See page 196)
2 On
044 PASSWORD-RCV 1 Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving. (See page 197)
2 On
046 SELECT RCV 1 Invalid Selecting whether the machine performs selective
reception. (See page 194)
2 Valid
No. Parameter
Setting
Number
Setting Comments