Philips LX3600 - Manual (Page 40)

40
English
3139 115 22851
Sound Control
IMPORTANT!
For proper surround sound, make
sure the speakers and subwoofer are
connected (see page 11).
Selecting surround sound
● Press SURR to select :
MULTI-channel or STEREO.
➜ The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
➜ The centre and surround speakers
operate only when the DVD home
cinema system is set to Multi-channel
mode.
In DVD,
➜ The available output modes for Multi-
channel include: Dolby Digital, DTS
(Digital Theatre Systems) Surround, Dolby
Surround and Dolby Pro Logic II.
In music discs, AUX, TUNER, TV,
➜ Select Multi-channel (Dolby Pro Logic
II) or Stereo.
➜ Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, mono (single channel sound)
sources will not produce any sound from
the surround speakers.
Helpful Hint:
– You are not able to select the surround
sound mode if the system menu/menu bar is
turned on.
Selecting digital sound effects
Select a preset digital sound effects that
matches your disc’s content or that
optimizes the sound of the musical style
you are playing.
● Press SOUND on the remote.
When playing movie discs or in TV mode,
you can select :
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs or while in
TUNER or AUX mode, you can select :
ROCK, DIGITAL, CLASSIC or JAZZ.
Volume control
● Adjust VOLUME control (or press
VOL +/- on the remote) to increase or
decrease the volume level.
➜ "
VOL MIN" is the minimum volume
level and “
VOL MAX” is the maximum
volume level.
To turn off the volume temporarily
● Press MUTE on the remote.
➜ Playback will continue without sound
and "
MUTE" appears.
➜ To restore the volume, press MUTE
again or increase the volume level.
Sound and Volume Controls
001-046_LX36_17_Eng 29/08/2003, 2:45 PM 40