Philips LX3600 - Manual (Page 43)

43
English
3139 115 22851
The DVD player does not start playback.
Cannot activate some features, such as
Angles, Subtitles, or multi-language
Audio.
There is no sound from the center and
surround speakers.
Radio reception is poor.
The remote control does not function
properly.
Low hum or buzz sound.
“Please enter Password ” is
displayed.
– Insert a readable disc with the playback side
facing down. (see page 23)
– Check the disc type, color system and region
code. (see page 23)
– Check for any scratches or smudges on the disc.
– Press SETUP to turn off the setup menu screen.
– Change the rating level. (see page 36)
– Moisture has condensed inside the system.
Remove the disc and leave the system turned on
for about an hour.
– The features may not be available on the DVD.
– Changing the language for the sound or subtitle
is prohibited on the DVD.
– Make sure the center and surround speakers are
connected correctly. (see page 11)
– Press SURR button to select a correct surround
sound setting. (see page 39)
– Make sure the source you are playing is
recorded or broadcast in surround sound (DTS,
Dolby Digital, etc.).
– If the signal is too weak, adjust the antenna or
connect an external antenna for better
reception.
– Increase the distance between the system and
your TV or VCR.
– Tune in to the correct frequency.
– Place the antenna farther away from any
equipment that may be causing the noise.
– Select the source (DISC or TUNER, for
example) before pressing the function button
(ÉÅ,
S, T.)
– Reduce the distance between the remote
control and the system.
– Replace the batteries with new ones.
– Point the remote control directly toward the IR
sensor.
– Check that the batteries are loaded correctly.
– Place the DVD system as far away as possible
from electrical devices that may be causing
interference.
– Select DISC LOCK in the Setup menu to unlock
the disc.
Problem Solution
Troubleshooting
001-046_LX36_17_Eng 29/08/2003, 2:45 PM 43