Philips CEM2000B - Manual (Page 26)

27
Disc cannot be ejected
Press and hold • .
Preset stations lost.
Battery cable is not correctly connected. •
Connect the battery cable to the terminal
that is always live.
Display show ERR-12
USB data error. Check the USB device. •
10 Troubleshooting
Caution
Never remove the casing of this apparatus. •
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using
this apparatus, check the following points
before requesting service.
No power or no sound.
Car engine is not on. Turn the car •
engine on.
Cable is not correctly connected. Check
•
connections.
Fuse is burnt. Replace fuse.
•
Volume is too low. Adjust volume. •
If the above solutions cannot help, press •
the RESET button.
Ensure that the track played is of a
•
compatible format.
Noise in broadcasts.
Signals are too weak. Select other •
stations with stronger signals.
Check the connection of the car antenna.
•
Change broadcast from Stereo to mono. •
Cannot play disc
Ensure that the disc label is inserted with •
the printed side facing up.
Wipe the disc with fibre cleaning cloth
•
from the centre to the edge in a straight
line.
This disc may be defective. Play another
•
disc.
Ensure that the CD is a finalised CD/CD-
•
R/CD-RW.
Ensure that the CD is not encoded with
•
copyright protection technologies.
The CD skips tracks
Ensure that the CD is not damaged or •
dirty.
Ensure that random mode is deactivated.
•
English
EN