Pioneer XV-DV535 - Manual (Page 45)

Additional information 10
45
En
English Moving the wireless speaker
If you need to move the wireless speaker, first
press
POWER on the top panel to turn the unit
off, then unplug the power cord.
Radio wave reflections
The radio waves received by the wireless
speaker include the radio wave coming directly
from the transmitter (direct wave) and waves
coming from various directions due to
reflections by walls, furniture and building
(reflected waves). The reflected waves (due to
obstacles and reflecting objects) further
produce a variety of reflected waves as well as
variation in reception condition depending on
locations. If the audio cannot be received
properly due to this phenomenon, try moving
the location of the wireless speaker a little. Also
note that audio may be interrupted due to the
reflected waves when a person crosses or
approaches the space between the transmitter
and wireless speaker.
Radio wave caution
This wireless speaker system uses a 2.4GHz
radio wave frequency, which is a band used by
other wireless systems (see list below). To
prevent noise or interrupted communication,
do not use this system nearby such devices, or
make sure these devices are switched off
during use. You can also try switching the
channel on the transmitter (see
Transmitter on
page 38) for better reception. 1
• Cordless phones
• Cordless FAX units
• Wireless broadband routers
• Wireless AV equipment
• Microwave-based health aids
• Microwave ovens
• Wireless controllers for game systems
• Bluetooth equipment
• Some baby monitors
Other, less common, equipment that may
operate on the same frequency:
• Anti-theft systems
• Warehouse logistic management systems
• Amateur radio stations (HAM)
• Discrimination systems for train or
emergency vehicles
Scope of operation
Use of this equipment is limited to home use.
(Transmission distances may be reduced
depending on communication environments.)
In the following locations, poor condition or
inability to receive radio waves may cause the
audio to be interrupted or stopped:
• In reinforced concrete buildings or steel-
framed or iron-framed buildings.
• Near large metallic furniture.
• In a crowd of people or near a building or
obstacle.
• In a location exposed to the magnetic field,
static electricity or radio wave interference
from radio communication equipment
using the same frequency band (2.4 GHz)
as this system, such as a Bluetooth device,
radio LAN device or microwave oven.
• If you live in a heavily populated residential
area (apartment, townhouse, etc.) and if
your neighbor's microwave is placed near
your system, you may experience radio
wave interference or no sound from the
Note
1 • If there is something obstructing the path between the transmitter and the wireless speaker (such as a metal door, concrete
wall, or insulation containing tinfoil), you may need to change the location of your system to prevent signal noise and interrup-
tions.
• If the transmitter is used near A/V equipment with an antenna input terminal, such as a TV, VCR, BS tuner or CS tuner, you
may experience noise interference on a TV near the transmitter. In such cases, place the transmitter at a larger distance from
the antenna input terminal of the A/V equipment.
XV-DV535_IPPAN.book 45 ページ ２００５年２月２３日 水曜日 午後２時５６分