Getting started, Getting started 01, Chapter 1 – Pioneer XV-DV535 User Manual

Page 6: Home theater sound setup, Using the wireless speaker system, Important, Stereo, Main, 3if the receiver is off, press, Try to be as quiet as possible after pressing

Advertising
background image

Getting started

01

6

En

Chapter 1

Getting started

Home theater sound setup

After setting up your front speakers as shown
below, refer to the supplied setup guide, or

Using the wireless speaker system

on page 10

for more wireless speaker placement options.

This is a standard multichannel surround
sound speaker setup:

Using the Auto MCACC setup for
optimal surround sound

The Multichannel Acoustic Calibration
(MCACC) system measures the acoustic
characteristics of your listening area, taking
into account ambient noise and testing for
channel delay and channel level. After you
have set up the microphone provided with your
system, the receiver uses the information from
a series of test tones to optimize the speaker
settings and equalization (Acoustic Calibration

EQ) for your particular room.

1

Important

• These test tones can be loud, so take care

that there is no one in the room who will be
startled by the noise.

• Make sure the mic and speakers are not

moved during the MCACC setup.

• The MCACC setup is not possible if the

wireless speaker mode is set to

Stereo

or

Off

(see

Using the wireless speaker system

on page 10 for more on this).

• To access green functions on the remote,

move the slider switch from

MAIN

to

SUB

.

1

Connect the microphone to the MCACC

MIC jack on the rear panel.

2

Place the microphone at your normal

listening position.

Place the mic about ear level at your normal
listening position using a table or chair.

Make sure there are no obstacles between the
speakers and the microphone.

3

If the receiver is off, press

STANDBY/ON to turn the power on.

4

If the wireless speaker is off, press

POWER to turn the power on.

5

Press MCACC SET UP.

Try to be as quiet as possible after pressing

MCACC SET UP

. The volume increases

automatically and the system outputs a series
of test tones.

Note

1 You only need to use the Auto MCACC setup once (unless you change the placement of your speakers or your room layout).

Front left

Listening position

Wireless speaker

Center

Subwoofer

Front right

STANDBY/ON

CD

FM/AM

OPEN CLOSE

DVD

TUNER

TV

LINE

L1/L2

0

8

WIRELESS

1

2

3

ZOOM

TOP MENU

REPEAT

AUDIO

ANGLE

RANDOM

SUBTITLE

PROGRAM

DIALOGUE

VIRTUAL SB

SURROUND

ADVANCED

AUTO SETUP MCACC

ZOOM

TOP MENU

DISPLAY

MENU

HOME

TIMER/

SET UP

EQ

7

8

9

0

MAIN

SUB

CLR

ENTER

SUB

9

TEST TONE

CH LEVEL

ADVANCED

SOUND

DIALOGUE

SURROUND

SETUP

SYSTEM

MIDNIGHT

QUIET/

6

6

6

6

6

6

FRONT

CENTER

MCACC

MIC

SURROUND

SUB

WOOFER

R

R

L

L

SPEAKERS

XV-DV535_IPPAN.book 6 ページ 2005年2月23日 水曜日 午後2時56分

Advertising
This manual is related to the following products: