Pioneer XV-DV535 - Manual (Page 51)

Additional information 10
51
En
English
Error Messages
Audio is interrupted. • This system uses high frequency radio waves that have properties similar to
light, such as linearity, reflection, refraction, diffraction, and interference.
Therefore, placement of the system can result in weak radio waves and/or
interruption.
• The distance between the transmitter and wireless speaker may be too
large. Use the wireless speaker within the reach of radio wave from the
transmitter.
• The system may be close to a location generating electrical noise. If this is
the case, find a location that does not affect the sound adversely.
Audio is suddenly
interrupted. • There may be radio communication equipment using the same frequency
band (2.4 GHz) as this system, such as a Bluetooth device, radio LAN device,
cordless phone or microwave oven, operating nearby.
Audio cannot be
received. • The radio wave reception is variable depending on locations due to the
effects of obstacles and reflecting objects. Try changing the location of the
wireless speaker a little.
• The transmitter and wireless speaker are designed and sold as a pair, and
they identify each other in communication. This means that communication
is not available between separately purchased transmitter and wireless
speaker.
Horizontal stripe noise
interference on a TV
near the transmitter. • If there a piece of A/V equipment with an antenna near the transmitter,
move the transmitter away from the antenna input terminal of the AV
equipment.
Problem Remedy
Message Description
Key Lock • The child lock feature is active. See Key lock setting on page 39.
RMode On • An operation is prohibited because the Recording Mode is on (see
Recording mode on page 30).
PhonesIn • An operation is prohibited because headphones are connected.
96k • An operation is prohibited because the source is digital 88.2 or 96kHz PCM.
Muting • An operation is prohibited because the sound is muted (press MUTE).
Exit • Appears when a menu is automatically exited after a set period of inactivity.
W.Stereo • An operation is prohibited because the wireless Stereo mode is selected.
Noisy! • Appears when the ambient noise level is too high during MCACC setup.
Err MIC! • There is a problem with your mic connection during MCACC setup.
Err SP! • There is a problem with one of the speaker connections during MCACC
setup.
Additional_information.fm 51 ページ ２００５年２月２３日 水曜日 午後８時５５分