Panasonic H-37PWD7UY - Manual (Page 19)

19
Panasonic AUTO
4 16
3 9
4
3
Explanation Picture
Changes in
accordance with the
Panasonic AUTO
mode setting (see
page 35).
ASPECT Controls
NORMAL ZOOM FULL
Panasonic AUTO JUST
NORMAL 16 : 9
Note: Do not allow the picture to be displayed in NORMAL mode for an extended period, as this can cause a permanent
after-image to remain on the Plasma Display Panel.
The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
Press repeatedly to move through the aspect options:
Notes:
• For PC signal input, the mode switches between “NORMAL”, “ZOOM” and “FULL” only.
• For a 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p signal input during
“COMPONENT”,“RGB” and “DVI” input signal, the mode is set to “FULL” mode, and switching is not possible.
• Panasonic AUTO can be selected only during Video signal input.
• The aspect mode is memorized separately for each input terminal (INPUT1, INPUT2, INPUT3 and PC IN).
The aspect mode changes each time the ENTER button is
pressed.
[During MULTI PIP Operations]
• Picture and Picture, Picture in Picture
:
• Others : Aspect switching is not possible.
[from the unit]
INPUT
SURROUND
VOL
N R
PICTURE SOUND SET UP
ASPECT
PICTURE
POS. /SIZE
MULTI
PIP SWAP SELECT MOVE
ZOOM
ASPECT
INPUT MENU ENTER
– +
VOL
NORMAL
3
4
NORMAL will display a 4:3 picture at its standard 4:3 size.
NORMAL
ZOOM mode magnifies the central section of the picture.
ZOOM
4
3
16
9
ZOOM
JUST mode will display a 4:3 picture at its maximum size but with aspect
correction applied to the center of the screen so that elongation is only
apparent at the left and right edges of the screen. The size of the picture
will depend on the original signal.
4
3 9
16
JUST
JUST
The display will automatically become enlarged (depending on the picture
source), allowing you to view the picture at its maximum size.
Notes:
• Panasonic AUTO mode is designed to automatically adjust the aspect
ratio to handle a mix of 16:9 and 4:3 program material. Certain 4:3
program material, such as stock market data screens, may occasionally
cause the image size to change unexpectedly. When viewing such
programs, it is recommended that the ASPECT be set to NORMAL.
• If adjusting the PICTURE V-POS/V-SIZE in Panasonic AUTO with FULL
mode, the adjustment is not memorized. When exiting the mode, the
screen will return to a former adjustment.
Panasonic
AUTO
FULL will display the picture at its maximum size but with slight elongation.
FULL
4
3
16
9
FULL
Mode
Image is expanded For an elongated image
For a 4:3 image