Panasonic H-37PWD7UY - Manual (Page 35)

35
SET UP for Input Signals
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
Press to select the “COLOR SYSTEM” or
“Panasonic AUTO”.
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
Mode
COLOR SYSTEM
Panasonic
AUTO (4:3)
Function
Set the color system to match the input signal. If set to “AUTO”, the color system is
determined automatically.
Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTO
is selected. If you would like to view 4:3 images in Just format, set to “JUST”.
AUTO PAL SECAM M.NTSC NTSC
3:2 PULLDOWN / VIDEO NR
Press to select 3:2 PULLDOWN
or VIDEO NR.
Press to set ON/OFF.
Press to exit from adjust mode.
3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie
pictures, which are recorded at 24 frames per second.
If the picture is not stable, turn the setting to OFF.
Note:
When ON, this setting only affects the following signal input:
• NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal.
• 525i(480i) 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.
1/2
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENT OFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (US)
COMPONENT / RGB-IN SELECT
RGB
INPUT LABEL
SIGNAL
POWER SAVE
SET UP
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3) OFF
NORMAL
[VIDEO]
VIDEO NR OFF
R
1/2
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENT OFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (US)
COMPONENT / RGB-IN SELECT
RGB
INPUT LABEL
SIGNAL
POWER SAVE
SET UP
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3) OFF
NORMAL
[VIDEO]
VIDEO NR OFF
Press ACTION ( ) button
Press ACTION ( ) button
1
2
VIDEO NR: Automatically reduces unwanted picture noise.
Note:
VIDEO NR cannot be adjusted while a PC signal is being applied.
SYNC
VIDEO NR
SIGNAL
AUTO
H-FREQ.
V-FREQ. kHz
Hz 33.8
60.0
[RGB]
3 : 2 PULLDOWN OFF
OFF
3 : 2 PULLDOWN
VIDEO NR
SIGNAL
OFF
OFF
[COMPONENT]
3 : 2 PULLDOWN
VIDEO NR
SIGNAL
OFF
OFF
H-FREQ.
V-FREQ. kHz
Hz 33.8
60.0
[DVI]