Polycom IP 650 - Manual (Page 27)

Customizing Your SoundPoint IP 650 SIP Phone
2 - 7
To activate Headset Memory Mode:
>> Press twice.
The flashing headset icon on the graphic display or a flashing headset key
indicates that the headset mode is activated. Pressing or
Answer soft key to receive a call will now connect to the your headset
automatically.
Ring Type
You can select from the different ring types to distinguish between lines or to
have a different ring from your neighbor’s phone. You can set distinctive
incoming ringing tones for contacts in your local directory.
To change the incoming ring to a desired sound:
1. Press .
2. Select Settings > Basic > Ring Type.
3. (Optional) If multiple lines are configured on your phone, first select the
line to change from the list using the
and .
4. Using the and , select the desired ring type.
Press the Play soft key to hear the selected ring type.
5. Press the Select soft key to change to the selected ring type.
6. Press or the Exit soft key repeatedly to return to the idle
display.
Note If you configure your SoundPoint IP 650 phone for silent ring, press the ringing Line
key or the Answer soft key to answer the call. If your handset is off hook, the call is
routed to the handset. If your handset is on hook, the call is routed to the speaker.