Polycom IP 650 - Manual (Page 81)

Troubleshooting Your SoundPoint IP 650 SIP Phone
6 - 3
Controls
Symptom Problem Corrective Action
The dial pad does not work. The dial pad on the SoundPoint
IP 650 phone does not respond. Do one of the following steps:
• Check for a response from other
feature keys or from the dialpad.
• Place a call to the phone from a known
working telephone. Check for display
updates.
• Press the Menu key followed by
System Status and Server Status to
check if the telephone is registered
correctly to the server.
• Press the Menu key followed by
System Status and Network Statistics.
Scroll down to see if LAN port shows
active or Inactive.
• Check the termination at the switch or
hub end of the network LAN cable.
Ensure that the switch/hub port
connected to the telephone is
operational (if not accessible, contact
your system administrator).
• Before restarting your phone, contact
your system administrator, since this
may allow more detailed
troubleshooting to occur before losing
any current status information.