Panasonic CQ-VA7005W - Manual (Page 26)

25
26 CQ-VD7005W
English
AV1/AV2
Note:
¡
You can set up the system so that the AV mode is not
selected (source skip). (
a page 37) (AV set to NAVI
INPUT is not skipped even if is set to
)
¡ If no operation is performed for 10 seconds or is
touched, the operation buttons disappear.
¡ AV terminal is not used for the Panasonic car
navigation system (available in the future). Refer to
for setting. ( a System Upgrade
Guidebook)
NAVI SETUP
ON
SOURCE SKIP
ENTER
TILT O / C ASP
MUTE SRC MENU
CQ-VD7001U
NAVI
OPEN / CLOSE ASPECT
PWR
VOL
P·MODE
CLOSE
CQ-VD7005W
TILT
TEXT
ENTER
SRC
Preparation:
¡
Connect an optional external device to the AV1/AV2.
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
[SRC]
Source Button
To switch Operation Screen ON, touch the center of
touch panel or press [ENTER].
Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are
connected.
q Touch “Source Button”.
d
w Touch /
(AV1/AV2) on the
Source Selection
Screen.
AV Mode Selection
Press [SRC] to change to the desired
mode.
[ENTER]