Connection with rear view camera, Connecting the reverse lead, English – Panasonic CQ-VA7005W User Manual
Page 67: Cq-vd7005w (rear)
14
15
CQ-VD7005W
English
Connection with Rear View Camera
Note:
¡
Refer to the operating instructions for the connected devices, in addition.
REVERSE
CAMERA-IN
P
N
D
2
L
R
Panasonic
Connecting the Reverse Lead
If using an optional rear view camera, the reverse lead
must be connected.
Connect the reverse lead (violet/white stripe) to the posi-
tive (+) lead of the reverse lamp (the lamp with a clear
lens that lights when the transmission gear is shifted into
the reverse position).
Note:
¡
Connect the reverse lead after cutting the terminal at
the end.
¡
Use a Reverse Extension Cord
!5
if needed.
Rear View Camera
(CY-RC50KW) (option)
(Video)
(Yellow)
RCA Cord (option)
Rear View Camera
Control Unit (option)
CQ-VD7005W
(Rear)
(Video)
(Yellow)
Reverse lamp
Clip connector
(option)
Battery
Car chassis
Transmission gear
!5 Reverse Extension Cord
(Violet/white stripe)
Reverse Lead
(Violet/white stripe)
Camera Input
Camera Input Terminal
(Yellow)
Check the reverse lamp.
Take it out of the back of
the tail lamp mount.