Panasonic ABV - Manual (Page 4)

ABV1
SPECIFICATIONS
1. Contact rating
2. Characteristics
Note: *1 O.F. 0.98N type is Min 5 × 10 5 (at 20 com)
3. Operating characteristics
( ): Low force type
DIMENSIONS mm General tolerance: ±0.4
Type Standard rating Low-level rating
AgNi alloy + Au clad contact
3 A 250 V AC (O.F. 1.96 N)
1 A 250 V AC (O.F. 0.98 N)
5 mA 6 V DC
2 mA 12 V DC
1 mA 24 V DC
AgNi alloy
5 A 250 V AC (O.F. 1.96 N)
3 A 250 V AC (O.F. 0.98 N)
—
Mechanical life (O.T.: Specified value) Min. 5x10 6 (at 60 cpm)
Electrical life
Nominal rating (O.T.: Max.) Min. 10 5 (at 20 cpm)* 1
Low-level rating (O.T.: Specified value) Min. 10 6 (at 20 cpm)
Insulation resistance Min. 100 M Ω (at 500 V DC insulation resistance meter)
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
1,000 Vrms
2,000 Vrms
2,000 Vrms
Vibration resistance 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening: max. 1 msec.)
Shock resistance Min. 294 m/s 2 (Contact opening: Max. 1 msec.)
Contact resistance
AgNi alloy contact type
Dust protected type (IP50): Max. 50 m Ω
Immersion protected type (IP67): Max. 100 m Ω
(By voltage drop 1 A 6 to 8 V DC)
AgNi alloy + Au clad contact type
Dust protected type (IP50): Max. 50 m Ω
Immersion protected type (IP67): Max. 100 m Ω
(By voltage drop 0.1 A 6 to 8 V DC)
Allowable operating speed (at no load) 1 to 500 mm/sec.
Max. operating cycle rate (at no load) 120 cpm
Ambient temperature (at no load) −40°C to +85°C
Unit weight Approx. 7 g (IP50 type)
Type of actuator Operating force, Max. Release force, Min.
Pretravel,
Max. mm
Movement
differential,
Max. mm
Overtravel,
Min. mm
Operating
position,
mm
Pin plunger 1.96N 0.98N 0.39N 0.25N 1.6 0.4 0.8 14.7 ±0.6
Hinge lever 1.18N 0.59N 0.13N 0.098N 3.2 1.2 1.2 15.3 ±1.2
Simulated roller lever 1.18N 0.59N 0.13N 0.098N 3.2 1.2 1.2 18.5 ±1.2
Short roller lever 2.16N 1.08N 0.39N 0.20N 1.6 0.5 0.8 20.7 ±0.8
Roller lever 1.18N 0.59N 0.13N 0.098N 3.2 1.2 1.2 20.7 ±1.2
1. Dust protected type
1-(1) .187 quick-connect terminal
Pin plunger
22.2 ±0.1
10.3 ±0.1
2.8
3.4
Operating
Position
14.7
±0.6
Pretravel
1.6 max
2.8
0.5
15.9
5.2
5.2
10.3
10
2.5
4.75
20.2 ±0.3
33
45.5
42
3.1 dia. +0.25
–0.05
3.1 +0.25
–0.05
Pretravel,
Max. mm
1.6
Movement differential,
Max. mm
0.4
Overtravel,
Min. mm
0.8
Operating position,
mm
14.7 ±0.6
All Rights Reserved © C OPYRIGHT Panasonic Electric Works Co., Ltd.