Pioneer DRM-604X - Manual (Page 39)

Chapter 4 MACINTOSH Driver Installation
4-8 Software Driver Installation Guide / Owner’s Manual
Descriptions of CLD REMOTE indicators and control panel (continued)
E — These are the control buttons. The large one in the top right corner is PLAY, the
one below it is PAUSE, the on the lower left is STOP, the two above that are SCAN
FORWARD and SCAN REVERSE, and the two above those in the upper right side
of this small panel are STEP FORWARD and STEP REVERSE.
F — The Menu Bar has pull down menus entitled: FILE EDIT DISC TRACK
and REPEAT. Here is a description of what you will find under each one:
FILE: This allows you to SAVE, set ABSOLUTE TIME or DISC TIME,
and to QUIT. NOTE: When ABSOLUTE TIME is selected, the time
numbers that appear in the CLD REMOTE panel indicate total time elapsed
on the entire CD audio disc. When DISC TIME is selected, the time
numbers that appear in the CLD REMOTE panel indicate the time elapsed
on the particular TRACK that is playing.
EDIT: There are options for UNDO, CUT, COPY, PASTE, CLEAR.
DISC: This menu item indicates the titles of the CD Audio discs loaded
into the Pioneer CD-ROM Changer. NOTE: Titles of non-audio CDs do
not appear, they are indicated by the words “NON-AUDIO DISC”.
TRACK: This indicates the Tracks on the CD audio disc.
REPEAT: This allows the user to instruct the player to REPEAT
TRACK, REPEAT DISC or REPEAT ALL. SEQUENTIAL or
RANDOM Repeat can also be selected.