Pioneer DRM-604X - Manual (Page 59)

Appendix C DOS/WINDOWS Device Driver & MSCDEX File
Owner’s Manual / Software Driver Installation Guide C-3
Device Driver command line switches:
Switch Description Example
/D:(device name) Specifies the device name of the
/D:MSCD000
CD-ROM device. This name MUST
agree with the device name
declared in MSCDEX.
/N:n1[,n2] Specifies the number of CD-ROM /N:6
discs that are in the magazine.
This is installed automatically with
Version 2.0 and above of the drivers.
You may not see this switch in the
device driver line .
/C:(device name) Specifies the device name of the /C:CDP
character device for CDP control
/S:n1[;h1][,n2[;h2]] Specifies the SCSI ID and the host /S:0
adapter number of the DRM-600.
This must be the same SCSI ID as
the one set by the dip switches.
This is installed automatically with
Version 2.0 and above of the drivers.
You may not see this switch in the
device driver line .
/B or /E Specifies whether or not the device
driver should load in a look ahead
buffer for prefetch.
/B -> Conventional Memory
/E -> Expanded Memory