Philips HDRW 720/17 - Manual (Page 75)

68
Parental level control (DVD video
only)
Films on pre-recorded DVD discs may contain scenes not suitable for
children. Therefore, some discs may contain 'Parental Control' rating
information that applies to the entire disc or to certain scenes on the
disc.
The appropriate scenes have filter values that reach from 1-8. If such a
scene is detected during playback, the filter value set on the DVD
recorder is compared to the scene. If the filter value is higher than the
setting, an alternative scene will be played (if available).
Most DVDs apply the rating to an entire DVD. Therefore, if certain
scenes exceed the rating you select, the entire disc will be blocked
from viewing.
Activating/deactivating parental level control
Preparation:
•) Switch on the TV set, and if necessary, select the channel for the DVD
recorder (channel 3 or 4).
•) Switch on the DVD recorder.
1 Press DISC MENU and then SYSTEM MENU on the remote
control.
P The menubar appears.
2 Select the '
A ' icon using D or C .
3 Press the SYSTEM MENU button on the remote control.
4 Select the '
A ' icon using D or C .
5 Select '
s (Disc features)' using B or A and confirm with C .
Disc features
Access controlEnter code
Auto resume On
6 Confirm 'Access control' using C .
7 Enter a 4-digit code of your choice. If the code is new, you may
have to enter the code a second time as confirmation.
8 Select the 'Parental level' using A or B and confirm with C .
A bar appears to select the parental level.
9 Select the appropriate rating using B , A or the number buttons
0..9 .
What do the ratings mean?
Rating 0 (displayed as '--') parental control not active.
Rating 1 (suitable for children)
Rating 8 (only suitable for adults)
What happens if a DVD scene contains a higher level than
the rating set?
If the recorder does not find a suitable alternative, playback will stop
and you must enter the four-digit code.
0 Confirm with OK . Quit using D and SYSTEM MENU .
Changing the country
The set filter values depend on the respective country. It is therefore
necessary to enter the country to which these filter values apply.
Preparation:
•) Switch on the TV set, and if necessary, select the channel for the DVD
recorder (channel 3 or 4).
•) Switch on the DVD recorder.
1 Press the DISC MENU and then the SYSTEM MENU button
on the remote control.
P
The menubar appears on the screen.
2 Select the '
A ' icon using D or C .
3 Select line '
s (Disc features)' using B or A and confirm with
C .
Disc features
Access controlEnter code
Auto resume On
4 Confirm the line 'Access control' using C .
5 Enter your four-digit code. If the code is new, you may have to
enter the code a second time as confirmation.
6 Select 'Change country' using B or A and confirm with C .
7 Select the corresponding country using A or B and confirm
with OK .
8 To end, press D and then SYSTEM MENU .
ENGLISH
Access control (Child Lock)