Maintenance, Oil check – Polaris MV700 User Manual

Page 73

Advertising
background image

SAFE

ADD 8 OZ

2

3

4

1

70

MAINTENANCE

Oil Check

The dipstick/oil fill (1) is located on the engine on the left side of the

ATV. Do not start the engine before the oil check.

NOTE: A rising oil level between checks in cool weather driving can

indicate contaminants such as gas or moisture collecting in

the crankcase. If the oil level is over the full/safe mark,

change the oil immediately.

1. Position the vehicle on a level surface.

2. Remove the dipstick and wipe it dry

with a clean cloth.

NOTE: Lift the lever lock (2) to remove

the dipstick.

3. Reinstall the dipstick completely, but

do not lock it. The dipstick must be

completely seated.

4. Remove the dipstick

and check the oil level.

Maintain the oil level

between the SAFE

and ADD marks (3).

Do not overfill.

NOTE: Due to the dipstick

entry angle into the

crankcase, the oil level

will read higher on the

bottom side of the dipstick.

Always read the level on

the upper surface (4) of

the dipstick.

5. After reinstalling the dipstick,

seat the lever lock.

Advertising