Panasonic DMR-E85H User Manual

Page 16

Advertising
background image

16

RQT7462

Reco

rd

in

g

Recording television programmes

Refer to the control reference on page 14.

[HDD] [RAM] [DVD-R]
The unit sets the best possible picture quality that fits the recording
within the remaining disc space.
e.g.,

Preparation
Select the channel to record.

1

While stopped

Press [FUNCTIONS].

2

Press [

3, 4, 2, 1] to select

“FLEXIBLE REC” and press [ENTER].

3

Press [

2, 1] to select “Hour” and

“Min.” and press [

3, 4] to set the

recording time.

≥You cannot record more than 8 hours.
≥You can also set the recording time with the numbered

buttons.

4

When you want to start recording

Press [

3, 4, 2, 1] to select “Start”

and press [ENTER].

≥Recording starts.
≥The recording mode becomes FR mode.

To exit the screen without recording
Press [RETURN].

To stop recording partway
Press [

∫].

To show the remaining time
Press [STATUS].

[HDD] [RAM] [DVD-R]
Preparation
≥Connect a video cassette recorder, etc. to this unit’s input

terminals.

≥When recording bilingual programmes

[HDD] [RAM]
When both M 1 and M 2 is selected on the connected equipment,
you can select the audio type in playback.
[DVD-R]
Select either M 1 or M 2 on the connected equipment. (You cannot
select the audio type in playback.)

≥When the output signal from the external equipment is NTSC,

change the “TV System” to “NTSC” in the SETUP menu
(

➡page 41).

≥To reduce noise in input from external equipment, set “AV-in NR” to

“On” in the SETUP menu (

➡page 37).

≥Press [HDD] or [DVD] to select the recording drive.

e.g., Connecting other video equipment to the AV3 input

terminals

If the audio output of the other equipment is monaural, connect to L/
MONO.

§

The S-VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.

1

While stopped

Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.

e.g., If you have connected to AV3 input terminals, select “A3”.

2

Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).

≥Using Flexible Recording (

➡left), you can save content of a

video cassette to 1 disc with the best possible quality of
recording without wasting disc space.

3

When recording from other video equipment

Start play on the other equipment.

4

Press [

¥ REC].

Recording starts.

To skip unwanted parts
Press [

;] to pause recording. (Press again to restart recording.)

To stop recording
Press [

∫].

Flexible Recording

Remain

45 minutes in
SP mode

60 minutes

Recorded

Perfectly fit!

Recording rate

between SP and LP

Programme to be recorded

FLEXIBLE REC

Start

Cancel

Recording in FR mode

Set rec. time

3 Hour 00 Min.

Maximum rec. time

3 Hour 00 Min.

SELECT

RETURN

ARD

L R

DVD-RAM

REC 59

Remaining
time

Recording from an external equipment

Almost all videos and DVD software on sale have been
treated to prevent illegal copying. Any software that has
been so treated cannot be recorded using this unit.

PULL OPEN

OPEN/CLOSE

REC

/x1.3

TIME SLIP

CH

AV3

S-VIDEO IN

VIDEO IN

AUDIO IN

R

L/MONO

TIME SLIP

DRIVE SELECT

HDD

DVD

L/MONO - AUDIO IN - R

VIDEO IN

S-VIDEO IN

Audio/Video cable

S-Video cable

§

Other video

equipment

Yellow White Red

This unit

7462L.book 16 ページ 2004年3月24日 水曜日 午前11時4分

Advertising