Panasonic TQBJ0350 - Manual (Page 21)

Start-up display
ENGLISH -
21
Preparation
Attention
Do not touch the LAN terminal with your bare hands or body, as body parts may have charged static electricity. Failure to z
do so may cause malfunctions.
Do not touch the metallic parts of LAN terminal and cable.
Please connect the LAN to indoor devices only. z
CONTROL PANEL
J
Terminals on side
J
* *
<POWER ON> button
Switch between stand-by mode and projection mode.
Switches to
VIDEO or S-VIDEO input.
Switches to RGB1 input.
Switches to RGB2 input.
Switches to DVI-D input.
Switches to HDMI input.
Switches to NETWORK input.
<MENU> button
Displays and clears the main menu, and returns to the
previous menu when the menu is displayed.
▲▼◄►button
Use these buttons to select menu items, change settings,
adjust levels, and to enter the [SECURITY] password.
<FUNCTION1> button
Assign the frequently use functions from options for
shortcut.
<ENTER> button
Press to activate a menu selection or to initiate a function.
<AV MUTE> button
Turn off the projection temporarily. ( Æ page 37)
<AUTO SETUP> button
Pressing this button while projecting an image automatically
corrects the picture positioning on the screen. While the
auto setup feature is active, a message “PROGRESS”
appears on the screen. ( Æ page 38)
LAN
Connect a LAN cable for network connection.
DVI-D IN
Connect a single link DVI-D signals.
HDMI IN
Connect a HDMI signals.
VIDEO IN
Connect a VIDEO signals.
S-VIDEO IN
Connect an S-VIDEO signals.
RGB (YP
B
P
R
)1 IN
Connect an RGB or YP
B
P
R
signals.
RGB2 IN
Connect an RGB or YP
B
P
R
signals.
DVI-D IN (PT-DZ570E/PT-DW530E)
Connect a single link DVI-D signals.
SERIAL IN
Connect an RS-232C cable from/to a computer.
REMOTE IN
Connect a cable from an external control circuit.
VARIABLE AUDIO OUT
Connect an audio cable for outputting audio signals to the
connected equipment.
AUDIO IN 1-3
Connect audio cables for inputting audio signal
corresponding to VIDEO IN, S-VIDEO IN.