Panasonic LIFI PT-61LCX70 - Manual (Page 19)

19
Getting Start
ed
Example 5 Connecting PC
To connect PC terminals
Projection Display
PC
MONITOR
OUT
AUDIO
OUT
Back of the unit
Power Cord
Notes
Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) (Not
included) to connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT compatible
D-SUB 15P terminal.
The computer shown in the illustration is for example purposes only. Additional equipment and cables shown are not supplied with
this set.
Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range.
Select the desired PC input position by pressing the TV/VIDEO button on the Remote Control. (p. 29) •
•
•
•
Pin No. Signal name
1 R
2 G
3 B
4 NC
5 NC
6 Ground for R
7 Ground for G
8 Ground for B
1
6 7 8
3
9
4 5
10
15 14 13 12 11
2
NC: Not connected
Pin No. Signal name
9 NC
10 Ground
11 NC
12 NC
13 HD/CSYNC
14 VD
15 NC
PC IN Terminal (D-SUB 15P) Pin Layouts
Connection port view
PC audio cable
(M3 stereo mini pin)
Connect a cable which matches the audio output
terminal on the computer.
Conversion adapter
(If necessary)
RGB cable (D-SUB 15P)
(Not included)
PC
AC 120 V
60 Hz