Panasonic LIFI PT-61LCX70 - Manual (Page 20)

20
RGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from the types listed below is input, the picture may not be displayed correctly,
or a black background may be displayed.
Notes
The D-SUB 15P connector can accept RGB (H-V sync separate).
The signal with a * mark is compatible with sync on Green.
To view a WXGA and WVGA picture, a setting change is necessary. Please refer to “PC Adjust” on page 37. •
•
•
Mode type
Signal data
No. of dots
(H × V)
Horizontal frequency
(kHz)
Vertical frequency
(Hz)
Personal Computer Signals
VGA400 (70 Hz) 640 × 400 31.47 70.08
VGA480 (60 Hz) 640 × 480 31.47 59.94
Macintosh 13˝ * 640 × 480 35.00 66.67
VGA480 (75 Hz) 640 × 480 37.50 75.00
SVGA (60 Hz) 800 × 600 37.88 60.32
SVGA (75 Hz) 800 × 600 46.88 75.00
SVGA (85 Hz) 800 × 600 53.67 85.06
Macintosh 16˝ * 832 × 624 49.73 74.55
WVGA (60 Hz) 852 × 480 31.47 59.94
XGA (60 Hz) 1 024 × 768 48.36 60.00
XGA (70 Hz) 1 024 × 768 56.48 70.07
XGA (75 Hz) 1 024 × 768 60.02 75.03
XGA (85 Hz) 1 024 × 768 68.67 85.00
Macintosh 21˝ * 1 152 × 870 68.68 75.06
SXGA (60 Hz) 1 280 × 1 024 63.98 60.02
WXGA (60 Hz) 1 366 × 768 48.39 60.04
Installation (continued)