Power on / off, Turning the power on and off – Panasonic LIFI PT-61LCX70 User Manual

Page 24

Advertising

Turning the Power ON and OFF

Always be sure to follow the procedure given below to

turn the Projection Display power ON and OFF.

The lamp cooling fan will continue to operate for
approximately 3 minutes after the power is turned off. During
this time, the POWER indicator will blink Red.

Do not disconnect the power cord from the outlet

and do not open the circuit breaker (unless

necessary) while the cooling fan is still operating. Do

not disconnect the power cord from the power outlet

while the power indicator blinks Red.

•

POWER indicator

POWER button

POWER indicator

POWER button

Power ON / OFF

Notes

If the POWER button is accidentally turned off during use,
after power is turned back on, it may take a short period
before the lamp automatically comes on.
This unit consumes approx. 0.4 W in OFF condition when
plugged into an AC outlet.

Power ON

Press POWER on Projection Display or Remote Control

to turn power on.

The Power Indicator blinks Green for about 10 seconds and
then turns solid Green.
Picture display may be delayed when the unit has not been
used for a long time or ambient temperature is low.
The fan rotating sound may be increased in high temperature
condition.

Power OFF

Press POWER on Projection Display or Remote Control

to turn power off.

Power shuts off after a Black Screen is displayed for about
3 minutes. If the POWER button is pressed during the Black
Screen display, Power is turned back on.
The Power Indicator blinks Red for about 3 minutes and then
LED turns off.

•

The Power Indicator

LED

ACTION

Off

Power – OFF

Red (blinking)

Power – OFF (Now cooling)

Green

Power – ON

Green (blinking) Power – ON (Preparing to light lamp)