Panasonic PV DM2093 - Manual (Page 32)

32 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] 32 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are
made, program index and information are also included. These index marks can be used to access or
scan recordings.
1
Press SEARCH*
in Playback or
Stop mode to
display INDEX
SEARCH screen,
and then press
NUMBER keys
to select the
recording number.
• To calculate
number, see below.
Index Search
Go directly to the desired recording.
• If Index Search is started very close to an index
mark, that index mark may not be counted in
the search.
2 Playback begins
at search end. To
search forward
or back 1 index,
press FF or REW
while screen left
is displayed (10
seconds).
NOTE: indicates start points of each recording.
6 1 5 7 2 3 4
■ To calculate the Index Number
1 7 5 3 4 6 2
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
ENTER I NDEX NUMBER : 1
US I NG 1- 9 KEYS
FORWARD SEARCH : FF
REVERSE SEARCH : REW
EX I T : SEARCH
I NDEX SEARCH
FORWARD SEARCH : FF
REVERSE SEARCH : REW
I NDEX SEARCH
FF
REW
To cancel, press PLAY.
NUMBER
keys
SELECT
SET
REW
FF
SEARCH
Tape Operation
Press FF or REW to start search.
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Note