Panasonic PV DM2093 - Manual (Page 60)

60 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] 60 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
STILL MODE
1
1) Press * to select
“STILL MODE.”
2) Press SET repeatedly
for mode. (See below)
2
Do steps 1 and 2 on page 58.
AUTO: “FIELD” (Field still) or “FRAME” (Frame still)
is automatically selected during the still mode.
(Factory preset)
FIELD: “FIELD” (Field still) is always selected.
This setting will reduce jitter when compared
with “AUTO” on some discs.
FRAME: “FRAME” (Frame still) is always selected.
Some texts and fi ne patterns will be seen clearly
when compared with “AUTO” on some discs.
Selecting TV MODE
a
1) Press to select “TV
MODE.”
2) Press SET repeatedly
for mode. (See below.)
b
Do steps 1 and 2 on page 58.
4:3 Pan & Scan : Widescreen video data is played in Pan
& Scan style (left and right of screen is
trimmed.)
• Video data not formatted in Pan &
Scan will play in letterbox style.
4:3 Letterbox : Widescreen video data is played in
Letterbox style (top and bottom of
screen has black margin).
Set the screen display style for widescreen video material
playback.
4:3 Pan & Scan (Factory preset)
4:3 Letterbox
Set to reduce jitter in a displayed still picture or a motion
picture.
3 Press ACTION twice to exit this mode.
Press ACTION twice to exit this mode. c
Example
(Factory preset)
*Important:
If a remote control button does not
work when pressed, press the DVD
button on the remote and try the
button again.
DVD MAIN MENU
SELECT :
SET : SET
END : ACT I ON
D I SC LANGUAGES
AUDIO OUTPUT
ST I L L MODE : AUTO
TV MODE : 4 : 3 Pan & Scan
DVD MAIN MENU
SELECT :
SET : SET
END : ACT I ON
D I SC LANGUAGES
AUDIO OUTPUT
ST I L L MODE
: AUTO
TV MODE : 4 : 3 Pan & Scan
SELECT
SET
ACTION
Settings for DVD Operation (continued)