Figure 4, Figure 5 – ParaBody 360101 User Manual
Page 4
Advertising
FIGURE 4
STEP 4
• Remove two 1/2 X 4” BOLTS, two 1/2” WASHERS, and two 1/2” LOCK NUTS from the BASE and STACK GUARD as shown in
FIGURE 4. (NOTE: Discard the 1/2 X 4” BOLT.)
4
0
1
2
3
4
5
6
1/2
1/2
1/2
1/2
1/2
1/2
FIGURE 5
STEP 5
• Securely fasten the FRONT LEG (1) and the BASE CONNECTION (3) to the BASE and STACK GUARD using two 1/2 X 4-1/2”
BOLTS (12) and two previously removed 1/2” LOCKNUTS. See FIGURE 5.
STACK GUARD
1/2” WASHER
1/2 X 4” BOLT
1/2”
NUT
BASE
BASE
12 1/2 X 4-1/2”
3
1
1/2”
NUT
STACK GUARD
Advertising