Figure 6 – ParaBody 360101 User Manual
Page 5
Advertising
5
STEP 6
Remove the existing CABLE (part #68331) using the following steps:
• Unscrew the threaded end of CABLE from the HEAD PLATE ASSEMBLY.
• Route the CABLE around the FLOATING PULLEY as shown in FIGURE 6.
REMOVE CABLE
• The pulleys in TOP BOOM may need to be temporarily removed to remove CABLE.
• Route the CABLE through the TOP BOOM as shown in FIGURE 6.
• Disconnect LAT BAR from TOP BOOM.
FIGURE 6
• (NOTE: Discard CABLE part #68331)
Advertising