Petsafe HBK11-11926 - Manual (Page 7)

www.petsafe.net 7
Add Fence Fabric
Gather (Quantity):
• (5) Clips
• Package of Tie Wires
• Roll of Chain Link Fabric
1. Unpack the chain link fabric rolls. Remove all binding materials.
2. Spread one chain link fabric roll flat on a level surface. Inspect that the wire ends are closed and
tangle free ( 5A).
3. Insert tension rod through the first diamonds of the fabric ( 5B).
4. Starting on the side opposite of the tension rod, carefully roll chain link fabric towards the tension rod.
Chain link fabric is strong and stiff and the roll is heavy, so a helper is recommended.
5. Start at a post next to the gate.
6. Connect the fabric to the gatepost by clipping the tension rod to the post (
5C). Secure all 5 clips.
7. Unroll the fabric around two sides of the dog kennel. Loosely add a tie wire to the top frame about
every 6 feet (1.8 m) to keep the fabric from falling down ( 5D).
5D
5C
5A
5B
Step
5