Panasonic cq-rx300n User Manual

Safety information, Before reading these instructions, Maintenance/fuse

Advertising
background image

Operating Instructions

AAC WMA MP3 CD Player/Receiver

Model:

CQ-RX400N/CQ-RX300N

WMA MP3 CD Player/Receiver

Model:

CQ-RX200N/CQ-RX103N/

CQ-RX102N/CQ-RX101N

• Please read these instructions carefully before using this product and keep this manual for future reference.

(CQ-RX400N)

Q’ty

Mounting Collar

(YEFX0217263A)

1

Trim Plate

(YGFC051023)

1

Power Connector

(K1HY13YY0002)

1

\CQ-RX400N\ \CQ-RX300N\
Remote Control Unit (includes a
battery)

(EUR7641010)

1

\CQ-RX400N\ \CQ-RX300N\
Removable Face Plate Case

(YGFA134302)

1

\CQ-RX200N\ \CQ-RX103N\ \CQ-RX102N\ \CQ-RX101N\
Request for use of the Removable Face Plate Case:
• To avoid trouble and ensure safety, use the optional Removable

Face Plate Case (YGFA134302).

Instruction kit

Q’ty

Operating Instructions

(English:

YGFM286051)

(Deutsch :

YGFM286052)

(Français :

YGFM286053)

(Nederlands : YGFM286054)

(Svenska :

YGFM286055)

(Italiano :

YGFM286056)

(Español :

YGFM286057)

(Dansk :

YGFM286058)

(Polski :

YGFM286059)

(Česky :

YGFM286060)

(Magyar :

YGFM286061)

1 set

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

OO-OOOOO

\CQ-RX400N\ \CQ-RX300N\
\CQ-RX200N\
System Upgrade Guidebook

(YGFM262851)

1

Installation Instructions

(English, Deutsch, Français,

Nederlands

: YGFM294417)

(Svenska, Italiano, Español,

Dansk

: YGFM294418)

(Polski, Česky, Magyar

: YGFM294419)

1

PAN EUROPEAN GUARANTEE
(Warranty Card)

1

Accessories

Installation kit (YEP0FZ5700)

Q’ty

Lock Cancel Plate

1 set

Mounting Bolt (5 mm œ)

(CQ-RX400N/

CQ-RX300N)

Notes:
• The number in parentheses underneath each accessory part

name is the part number for maintenance and service.

• Accessories and their part numbers are subject to modifi cation

without prior notice due to improvements.

• Mounting Collar and Trim Plate are mounted on the main unit at

shipment.

English

Safety Information

Q

Read the operating instructions for the unit and all other

components of your car audio system carefully before using the
system. They contain instructions about how to use the system in
a safe and effective manner. Panasonic assumes no responsibility
for any problems resulting from failure to observe the instructions
given in this manual.

Warning

This pictograph intends to alert you to the presence
of important operating instructions and installation
instructions. Failure to heed the instructions may result
in severe injury or death.

Q

This manual uses pictographs to show you how to use the product

safely and to alert you to potential dangers resulting from improper
connections and operations. The meanings of the pictographs
are explained below. It is important that you fully understand the
meanings of the pictographs in order to use this manual and the
system properly.

Caution

This pictograph intends to alert you to the presence

of important operating instructions and installation

instructions. Failure to heed the instructions may result in

injury or material damage.

Warning

Observe the following warnings when using this

unit.

R

The driver should neither watch the display nor operate

the system while driving.

Watching the display or operating the system will distract the
driver from looking ahead of the vehicle and can cause accidents.
Always stop the vehicle in a safe location and use the parking
brake before watching the display or operating the system.

R

Use the proper power supply.

This product is designed for operation with a negative grounded
12 V DC battery system. Never operate this product with other
battery systems, especially a 24 V DC battery system.

R

Keep batteries and insulation fi lm out of reach of infants.

Batteries and insulation fi lm can be ingested, so keep them out of
the reach of infants. If an infant ingests a battery or insulation fi lm,
please seek immediate medical attention.

R

Protect the Deck Mechanism.

Do not insert any foreign objects into the slot of this unit.

R

Do not disassemble or modify the unit.

Do not disassemble, modify the unit or attempt to repair the
product yourself. If the product needs to be repaired, consult your
dealer or an authorized Panasonic Service Centre.

R

Do not use the unit when it is out of order.

If the unit is out of order (no power, no sound) or in an abnormal
state (has foreign objects in it, is exposed to water, is smoking, or
smells), turn it off immediately and consult your dealer.

R

The remote control unit should not lie about in the car.

If the remote control unit lies about, it could fall on the fl oor while
driving, get wedged under the brake pedal, and lead to a traffi c
accident.

R

Refer fuse replacement to qualifi ed service personnel.

When the fuse blows out, eliminate the cause and have it replaced
with the fuse prescribed for this unit by a qualifi ed service
engineer. Incorrect replacement of the fuse may lead to smoke,
fi re, and damage to the product.

Observe the following warnings when installing.

R

Disconnect the lead from the negative (–) battery

terminal before installation.

Wiring and installation with the negative (–) battery terminal
connected may cause electrical shock and injury due to a short
circuit. Some cars equipped with the electrical safety system have
specifi c procedures of battery terminal disconnection.
FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE
UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM
RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL
INJURY OR DEATH.

R

Never use safety-related components for installation,

grounding, and other such functions.

Do not use safety-related vehicle components (fuel tank, brake,
suspension, steering wheel, pedals, airbag, etc.) for wiring or
fi xing the product or its accessories.

R

Installing the product on the air bag cover or in a location

where it interferes with airbag operation is prohibited.

R

Check for piping, gasoline tank, electric wiring, and

other items before installing the product.

If you need to open a hole in the vehicle chassis to attach or wire
the product, fi rst check where the wire harness, gasoline tank,
and electric wiring are located. Then open the hole from outside if
possible.

R

Never install the product in a location where it interferes

with your fi eld of vision.

R

Never have the power cord branched to supply other

equipment with power.

R

After installation and wiring, you should check the

normal operation of other electrical equipment.

The continuation of their using in abnormal conditions may cause
fi re, electrical shock or a traffi c accident.

R

In the case of installation to an airbag-equipping

car, confi rm warnings and cautions of the vehicle
manufacturer before installation.

R

Make sure the leads do not interfere with driving or

getting in and out of the vehicle.

R

Insulate all exposed wires to prevent short circuiting.

Caution

Observe the following cautions when using this

unit.

R

Keep the sound volume at an appropriate level.

Keep the volume level low enough to be aware of road and traffi c
conditions while driving.

R

This unit is designed for use exclusively in automobiles.

R

Do not operate the unit for a prolonged period with the

engine turned off.

Operating the audio system for a long period of time with the
engine turned off will drain the battery.

R

Do not expose the unit to direct sunlight or excessive

heat.

Otherwise these will raise the interior temperature of the unit, and
it may lead to smoke, fi re, or other damage to the unit.

R

Do not use the product where it is exposed to water,

moisture, or dust.

Exposure of the unit to water, moisture, or dust may lead to
smoke, fi re, or other damage to the unit. Make especially sure that
the unit does not get wet in car washes or on rainy days.

R

Set the volume level to low enough before the AUX

connection is completed.

Failure to observe this, the loud noise may come out and damage
your speakers and your hearing. Direct connection of the speaker/
headphone output of an external device without any attenuator
may distort sound or damage the connected external device.

Observe the following cautions when installing.

R

Refer wiring and installation to qualifi ed service

personnel.

Installation of this unit requires special skills and experience. For
maximum safety, have it installed by your dealer. Panasonic is not
liable for any problems resulting from your own installation of the
unit.

R

Follow the instructions to install and wire the product.

Not following the instructions to properly install and wire the
product could cause an accident or fi re.

R

Take care not to damage the leads.

When wiring, take care not to damage the leads. Prevent them
from getting caught in the vehicle chassis, screws, and moving
parts such as seat rails. Do not scratch, pull, bend or twist the
leads. Do not run them near heat sources or place heavy objects
on them. If leads must be run over sharp metal edges, protect the
leads by winding them with vinyl tape or similar protection.

R

Use the designated parts and tools for installation.

Use the supplied or designated parts and appropriate tools to
install the product. The use of parts other than those supplied
or designated may result in internal damage to the unit. Faulty
installation may lead to an accident, a malfunction or fi re.

R

Do not block the air vent or the cooling plate of the unit.

Blocking these parts will cause the interior of the unit to overheat
and will result in fi re or other damage.

R

Do not install the product where it is exposed to strong

vibrations or is unstable.

Avoid slanted or strongly curved surfaces for installation. If the

installation is not stable, the unit may fall down while driving and

this can lead to an accident or injury.

R

Installation Angle

The product should be installed in a horizontal position with the

front end up at a convenient angle, but not more than 30˚.

The user should bear in mind that in some areas there may be

restrictions on how and where this unit must be installed. Consult

your dealer for further details.

R

Wear gloves for safety. Make sure that wiring is

completed before installation.

R

To prevent damage to the unit, do not connect the power

connector until the whole wiring is completed.

R

Do not connect more than one speaker to one set of

speaker leads. (except for connecting to a tweeter)

Observe the following cautions when handling the

battery for the remote control unit.

\CQ-RX400N\ \CQ-RX300N\
• Use only specifi ed battery (CR2025).
• Match the polarity of the battery with the (+) and (–) marks in the

battery case.

• Replace a dead battery as soon as possible.
• Remove the battery from the remote control unit when not using it

for an extended period of time.

• Insulate the battery (by placing them in a plastic bag or covering

them with vinyl tape) before disposal or storage.

• Dispose of the battery according to the local regulations.
• Do not disassemble, recharge, heat or short the battery. Do not

throw a battery into a fi re or water.

In case of battery leakage

• Thoroughly wipe the battery liquid off the battery case and insert

new battery.

• If any part of your body or clothing comes into contact with battery

liquid, wash it with plenty of water.

• If battery liquid comes into contact with your eyes, wash them with

plenty of water and get immediate medical attention.

Observe the following cautions when using USB

device.

\CQ-RX400N\ \CQ-RX300N\

• Do not connect a USB device directly to this unit. If the USB device

is connected directly to this unit and an accident occurs, or if the
brakes are applied suddenly, the driver or passenger may bump
into the USB device and may get injured.

• Position the USB device and USB extension cable so that they do

not obstruct your driving.

• Do not connect any USB device other than USB memory, a USB

audio player or iPod series (\CQ-RX400N\). Do not connect multiple
USB devices to the USB connector. Drawing power for multiple
USB devices from the connector could cause overheating and
smoking.

Caution Label

Deck Ass’y (in the unit,
upper side)

Laser Product

Label Indications and Their Locations

CAUTION
LASER RADIATION WHEN OPEN. DO NOT STARE INTO
BEAM.

CLASS 1 LASER PRODUCT

Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)

This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be

mixed with general household waste.

For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be

accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer

upon the purchase of an equivalent new product.

Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human

health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority

for further details of your nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

Caution:

This product utilizes a laser.
Use of controls or adjustments or performance of
procedures other than those specifi ed herein may
result in hazardous radiation exposure.

Do not take apart this unit or attempt to make
any changes yourself.

This unit is a very intricate device that uses a laser

pickup to retrieve information from the surface of

compact discs. The laser is carefully shielded so that its

rays remain inside the cabinet.

Therefore, never try to disassemble the player or alter

any of its parts since you may be exposed to laser rays

and dangerous voltages.

(Bottom of the unit)

Before Reading These Instructions

Panasonic welcomes you to our constantly growing family of electronic products owners.

We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and

assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of

enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family.
\CQ-RX400N\ \CQ-RX300N\ \CQ-RX200N\

The instruction manual consists of 2 books. One is “Operating Instructions” describing the operations of the main unit.

The other is “System Upgrade Guidebook” describing the optional devices such as CD changer.

Differences Among 6 Models

This operating instruction manual is for 6 models CQ-RX400N, CQ-RX300N, CQ-RX200N, CQ-RX103N, CQ-RX102N and CQ-RX101N. All illustrations throughout

this manual represent model CQ-RX400N unless otherwise specifi ed. The following table describes the differences among 6 models.

Models

Features

CQ-RX400N

CQ-RX300N

CQ-RX200N

CQ-RX103N

CQ-RX102N

CQ-RX101N

Removable Face Plate Case Included

Included

Not included

Not included

Not included

Not included

Remote Control Unit

Included

Included

Not included

Not included

Not included

Not included

System Upgrade Guidebook Included

Included

Included

Not included

Not included

Not included

System-up Connector

Supported

Supported

Supported

Not Supported

Not Supported

Not Supported

Preamp Out Connector

2 (Front/Rear)

2 (Front/Rear)

1 (Rear)

1 (Rear)

1 (Rear)

1 (Rear)

USB Connector

Supported (USB iPod) Supported

Not Supported

Not Supported

Not Supported

Not Supported

AAC playback

Supported

Supported

Not Supported

Not Supported

Not Supported

Not Supported

Button logo colour

Blue

Red

Red

Blue

Green

Red

Maintenance/Fuse

Your product is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exterior

cleaning. Never use benzine, thinner, or other solvents.

If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Service Centre.

Anti-Theft System

This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable.

Cleaning the Unit

Fuse

Notes:
• Do not touch the contacts on the face plate and the main

unit, since this may result in poor electrical contact.

• If dirt or other foreign substances get on the contacts, wipe

them off with a clean and dry cloth.

Face Plate Removing/Mounting

(Anti-Theft System)

Warning

• Use fuses of the same specifi ed rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit directly

without a fuse could cause fi re or damage to the unit. If the replaced fuse fails, contact your nearest authorized
Panasonic Service Centre.

Removing

1

Turn off the power.

2

Press

[ ]. The face plate will open.

3

Pull it out toward you.

\CQ-RX400N\ \CQ-RX300N\

4

Put the face plate in the case.

Mounting

1

Slide the left side of the face plate in place.

2

Press the right end of face plate until a
“click” is heard.

Expansion Module (Hub Unit)

\CQ-RX400N\ \CQ-RX300N\ \CQ-RX200N\

Connection of the Expansion Module (hub unit, CY-EM100N) allows

users to connect up to 4 optional devices shown below.

Wide Array of Components for System Upgrade

\CQ-RX400N\ \CQ-RX300N\ \CQ-RX200N\

Various optional components allow users to obtain availability of wide range of

system upgrade. Upgrading the system delivers relaxed AV space in a car. For

further information, refer to the separate System Upgrade Guidebook.

iPod
The optional adaptor (Direct Cable for iPod: CA-DC300N) allows
you to connect the optional iPod series.
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.

• CD Changer

The optional adaptor (Conversion Cable for DVD/CD Changer:
CA-CC30N) allows you to connect the optional Panasonic CD
changer unit (CX-DP880N).

Bluetooth

®

Using the optional Bluetooth Unit (CY-BT200N) and a Bluetooth
device enables hands-free telephony and Bluetooth Audio listening
with this unit.
Note: This unit does not support CY-BT100N.
Bluetooth

®

The Bluetooth word mark and logo are owned by the Bluetooth SIG,

Inc. and any use of such marks by Matsushita Electric Industrial Co.,
Ltd. is under license. Other trademarks and trade name are those of
their respective owners.

Features

SQ (Sound Quality)

You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ, CLUB). You

can customize your settings for these and save them for instant recall.
SQ3 (3-Band Sound Quality)

Center frequency and level are adjustable in each of 3 bands. This lets

you fi ne-tune sound quality for each genre to suit car-interior acoustics

and your personal preferences. (

«

“Sound Control”)

USB Connector

\CQ-RX400N\ \CQ-RX300N\

The USB Connector is equipped on the front panel. (

«

System

Upgrade Guidebook)

By connecting a USB memory (not included) to USB connector via a

USB extension cable (USB 2.0, not included), you can enjoy MP3/

WMA/AAC fi les stored on the USB memory (not included) in your car.
\CQ-RX400N\

By connecting iPod series to USB connector via a USB extension cable

for iPod (USB 2.0, not included), you can enjoy music fi les stored on
the iPod series in your car.

AUX (AUX1) Input Terminal

The AUX input terminal is equipped on the front panel.

Your mobile audio player and other devices are connectable to this unit

without any diffi culty.

Printed in China

Specifi cations

General

Power supply

: DC 12 V (11 V – 16 V DC), test

voltage 14.4 V, negative ground

Current consumption

: Less than 2.1 A

(CD mode; 0.5 W x 4 channels)

Maximum power output

: 50 W x 4 channels (at 1 kHz),

volume control maximum

Power output

: 22 W x 4 channels

(DIN 45 324, at 4 j )

Tone/SQ adjustment range : SQ Low/Bass: ±12 dB

(at 60 Hz, 80 Hz, 100 Hz, 200 Hz)

SQ Mid: ±12 dB

(at 500 Hz, 1 kHz, 2 kHz, 3 kHz)

SQ High/Treble: ±12 dB

(at 10 kHz, 12 kHz, 15 kHz, 18 kHz)

Speaker impedance

: 4 – 8 j

Pre-amp output voltage

: 2.0 V (CD mode, 1 kHz, 0 dB)

Pre-amp output impedance : 200 j

USB Connector \CQ-RX400N\ \CQ-RX300N\

USB Standard Compatibility : 1.1/2.0 Full Speed

Maximum Supply Current : 500 mA

Front AUX input

Input impedance

: 10 kj

Allowable external input : 2.0 V

Connector

: 3.5 mm œ Stereo mini-pin

Dimensions (W x H x D)

: 178 x 50 x 160 mm

Weight

: 1.2 kg

Disc Player

Sampling frequency

: 8 times oversampling

DA converter

: 1 bit DAC System

Pick-up type

: Astigma 3-beam

Light source

: Semiconductor laser

Wave length

: 790 nm

Frequency response

: 20 Hz – 20 kHz (±1 dB)

Signal to noise ratio

: 96 dB

Total harmonic distortion

: 0.01 % (1 kHz)

Wow and fl utter

: Below measurable limits

Channel separation

: 85 dB

Sales and Support Information

For UK and Ireland customers only.

Direct Sales at Panasonic UK

• Order accessories and consumable items for your product with ease and

confi dence by phoning our Customer Care Centre Monday - Thursday
9:00am - 5:30pm, Friday 9:30am - 5:30pm. (Excluding public holidays).

• Or go on line through our Internet Accessory ordering application at

www.panasonic.co.uk.

• Most major credit and debit cards accepted.
• All enquiries, transactions and distribution facilities are provided

directly by Panasonic UK Ltd.

• It couldn’t be simpler!
• Also available through our Internet is direct shopping for a wide range of

fi nished products, so take a browse on our website for further details.

Customer Care Centre

• For customers within the UK: 0844 844 3852
• For customers within the Republic of Ireland: 01 289 8333
• Visit our website for product information
www.panasonic.co.uk.
• E-mail: [email protected]

Notes:
• Remote Control Unit for CQ-RX200N/CQ-RX103N/CQ-RX102N/

CQ-RX101N is option (CA-RC80N).

• The optional remote control is available from your local dealer.

(CA-RC80N)

Power
Mode
(Source)

Tune
Track selection
Fast forward/fast reverse

(CA-RC80N)

Mute/attenuation

Volume

Band
Pause

FM Radio

Frequency range

: 87.5 MHz – 108.0 MHz

Usable sensitivity

: 6 dB/µV (S/N 30 dB)

Stereo separation

: 35 dB (at 1 kHz)

AM (MW) Radio

Frequency range

: 531 kHz – 1 602 kHz

Usable sensitivity

: 28 dB/µV (S/N 20 dB)

AM (LW) Radio

Frequency range

: 153 kHz – 279 kHz

Usable sensitivity

: 32 dB/µV (S/N 20 dB)

Notes:
• Specifi cations and design are subject to modifi cation without

notice due to improvements.

• Some fi gures and illustrations in this manual may be different

from your product.

Authorized Representative
[Requirements of the EMC directive]:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany

Matsushita Electric Industrial Co., Ltd.

Web Site: http://panasonic.net

Notes on MP3/WMA/AAC

Notes on MP3/WMA/AAC

Playable Audio File

CQ-RX400N

MP3/WMA/AAC

CQ-RX300N

MP3/WMA/AAC

CQ-RX200N

MP3/WMA

CQ-RX103N

MP3/WMA

CQ-RX102N

MP3/WMA

CQ-RX101N

MP3/WMA

Notes for AAC playback is only for the model CQ-RX400N/
CQ-RX300N.

What is MP3/WMA/AAC?

MP3* (MPEG Audio Layer-3) and WMA (Windows Media

TM

Audio) are the compression formats of digital audio. The former

is developed by MPEG (Motion Picture Experts Group), and

the latter is developed by Microsoft Corporation. Using these

compression formats, you can record the contents of about

10 music CDs on a single CD media (This fi gures refer to data

recorded on a 650 MB CD-R or CD-RW at a fi xed bit rate of

128 kbps and a sampling frequency of 44.1 kHz).

*MPEG Layer-3 audio coding technology licensed from

Fraunhofer.

AAC is an abbreviation for “Advanced Audio Coding”.

It has been defi ned as a standard for audio compression

technology using MPEG 2 and MPEG 4.

Note: MP3/WMA/AAC encoding and writing software is not
supplied with this unit.

Points to Remember When Making MP3/

WMA/AAC Files

Common

• High bit rate and high sampling frequency are recommended

for high quality sounds.

• Selecting VBR (Variable Bit Rate) is not recommended

because playing time is not displayed properly and sound
may be skipped.

• The playback sound quality differs depending on the

encoding circumstances. For details, refer to the instructions
of your own encoding software and writing software.

MP3

• It is recommended to set the bit rate to “128 kbps or more”

and “fi xed”.

WMA

• It is recommended to set the bit rate to “64 kbps or more”

and “fi xed”.

• Do not set the copy protect attribute on the WMA fi le to

enable this unit to play back.

AAC

• It is recommended to set the bit rate to “128 kbps or more”

and “fi xed”.

• The formats and extensions for AAC data vary according to

the encoder software used.

• AAC fi les which can be played on this unit have the “.m4a”

extension and were encoded with Apple iTunes

®

version 7.

• The fi le extension for fi les encoded with the iTunes Apple

Lossless Encoder is “.m4a”, but such fi les cannot be played
on this player.

• Files under copyright protection cannot be played.

Caution

Never assign the “.mp3”, “.wma” or “.m4a” fi le
name extension to a fi le that is not in the MP3/
WMA/AAC format. This may not only produce
noise from the speaker damage, but also damage
your hearing.

iTunes is a trademark of Apple Inc., registered in the U.S.

and other countries/regions.

Windows Media, and the

Windows logo are trademarks, or

registered trademarks of Microsoft

Corporation in the United States

and/or other countries/regions.

Notes on MP3/WMA/AAC (continued)

Display Information

Displayed items

CD-TEXT

Disc title
Track title

MP3 (ID3 tag)

Album name
Title name/artist name

MP3/WMA/AAC

Folder name
File name

WMA (WMA tag)

Album name
Title name/artist name

AAC (Song information)

Album name
Title name/artist name

Displayable characters

• Displayable length of fi le name/folder name: within

32 characters. (Unicoded fi le and folder names are reduced
by half in the number of displayable characters.)

• Name fi les and folders in accordance with the standard of

each fi le system. Refer to the instructions of writing software
for details.

• ASCII character set and special characters in each language

can be displayed.

• Some Cyrillic characters in the Unicode can be displayed.

ASCII character set

A to Z, a to z, digits 0 to 9, and the following symbols:

(space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ~
Special Characters

А Б В Г Е а б в г е

Д д

Т У Ф Х Ц т у ф х ц

Щ Ъ Ы Ь щ ъ ы ь

Notes:
• With some software in which MP3/WMA/AAC format fi les

have been encoded, the character information may not be
displayed properly.

• Undisplayable characters and symbols will be converted into

an asterisk ( ).

• It is recommended that the length of the fi le name is less

than 8 characters (excluding the fi le extension).

Recording MP3/WMA/AAC Files on a CD-

Media/USB-Device

You are recommended to minimize the chances of making

a disc that contains both CD-DA fi les and MP3/WMA/AAC
fi les.

If CD-DA fi les are on the same disc as MP3, WMA or AAC

fi les or the songs may not play in the intended order, or
some songs may not play at all.

When storing MP3 data, WMA data or AAC data on the

same disc, use different folders for each data.

• Do not record fi les other than MP3/WMA/AAC fi les and

unnecessary folder on a disc.

• The name of an MP3/WMA/AAC fi le should be added by

rules as shown in the following descriptions and also comply
with the rules of each fi le system.

• The fi le extension “.mp3”, “.wma” or “.m4a” should be

assigned to each fi le depending on the fi le format.

• You may encounter trouble in playing MP3/WMA/AAC fi les or

displaying the information of MP3/WMA/AAC fi les recorded
with certain writing software or CD recorders.

• This unit does not have a play list function.
• Although Multi-session recording is supported, the use of

Disc-at-Once is recommended.

Supported fi le systems
Q

CD-media

ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet,

Romeo
Note: Apple HFS, UDF 1.50, Mix CD and CD Extra are not

supported.

Q

USB-device

\CQ-RX400N\ \CQ-RX300N\

File system is FAT12/16/32

Compression formats

(Recommendation: “Points to Remember When Making MP3/WMA/AAC Files”

«

Left)

\CQ-RX400N\ \CQ-RX300N\

Compression method

Bit rate

VBR Sampling frequency

MPEG 1 Audio Layer-3 (MP3)

32 k – 320 kbps Yes

32, 44.1, 48 kHz

MPEG 2 Audio Layer-3 (MP3)

8 k – 160 kbps

Yes

16, 22.05, 24 kHz

MPEG 2.5 Audio Layer-3 (MP3)

8 k – 160 kbps

Yes

8, 11.025, 12 kHz

Windows Media Audio Ver. 2B9*

64 k – 160 kbps Yes

32, 44.1, 48 kHz

MPEG 4 Advanced Audio Coding Low Complexity
(AAC LC)

16 k – 320 kbps Yes

8, 11.025, 12, 16, 22.05, 24, 32,
44.1, 48 kHz

* WMA 9 Professional/LossLess/Voice are not supported.

Notes on MP3/WMA/AAC (continued)

Folder Selection Order/File Playback Order

Maximum number of fi les/folders

• Maximum depth of trees: 8
\CQ-RX400N\ \CQ-RX300N\
• Maximum number of fi les
CD-media: 999
USB device: 65 535
• Maximum number of fi les in one folder
CD-media: 999
USB device: 999
• Maximum number of folders:
CD-media: 256 (Root folder is included.)
USB device: 255 (Root folder is included.)
\CQ-RX200N\ \CQ-RX103N\ \CQ-RX102N\ \CQ-RX101N\
• Maximum number of fi les: 999
• Maximum number of fi les in one folder: 999
• Maximum number of folders: 256 (Root folder is included.)
Notes:
• You can shorten the duration between data read and

playback by decreasing the quantity of fi les or folders, or the
depth of the hierarchy.

• This unit counts the number of folders irrespective of the

presence or absence of an MP3/WMA/AAC fi le.

• If the selected folder does not contain any MP3/WMA/AAC

fi les, the nearest MP3/WMA/AAC fi les in the order of
playback will be played.

• Playback order may be different from other MP3/WMA/AAC

players even if the same disc is used.

• “ROOT” appears when displaying the root folder name.
\CQ-RX400N\ \CQ-RX300N\
• Empty folders stored on the USB memory are not included in

the folder count.

• Depending on the connected USB memory, the order in

which the fi les are played back may differ to the order in
which the fi les were stored.

1

1

4

5

6

2

3

8

7

8

Root folder

(Root Directory)

Folder Selection

In the order

Tree 1 Tree 2 Tree 3 Tree 4

Tree 8 (Max.)

File Selection

In the order

Q

CD-media

Q

USB-device

\CQ-RX400N\ \CQ-RX300N\

Tree 1 Tree 2 Tree 3 Tree 4 Tree 5

Tree 8 (Max.)

1

4

5

2

3

1

5

Root folder

(Root Directory)

Folder Selection

In the order
File Selection

In the order

\CQ-RX200N\ \CQ-RX103N\ \CQ-RX102N\ \CQ-RX101N\

Compression method

Bit rate

VBR Sampling frequency

MPEG 1 Audio Layer-3 (MP3)

32 k – 320 kbps Yes

32, 44.1, 48 kHz

MPEG 2 Audio Layer-3 (MP3)

8 k – 160 kbps

Yes

16, 22.05, 24 kHz

MPEG 2.5 Audio Layer-3 (MP3)

8 k – 160 kbps

Yes

8, 11.025, 12 kHz

Windows Media Audio Ver. 2B9*

64 k – 160 kbps Yes

32, 44.1, 48 kHz

* WMA 9 Professional/LossLess/Voice are not supported.

If You Suspect Something Wrong

Check and take steps as described below.

If the described suggestions do not solve the problem, it is

recommended to take the unit to your nearest authorized Panasonic

Service Centre. The product should be serviced only by qualifi ed

personnel. Please refer the checking and the repair to professionals.

Panasonic shall not be liable for any accidents arising out of neglect

of checking the unit or your own repair after your checking.
Never take measures especially those other than
indicated by italic
letters in “Possible Solution” described
below because those are too dangerous for users to
handle themselves.

Troubleshooting

Warning

• Do not use the unit in an irregular condition, for example,

without sound, or with smoke or a foul smell, which can cause
ignition or electric shock. Immediately stop using the unit and
consult your dealer.

• Never try to repair the unit by yourself because it is dangerous

to do so.

Common

No power

Start the engine. (Or turn the ignition

switch to the ACC position.)

• Verify the wiring. (battery lead, power

lead, ground lead, etc.)

• Fuse blown (Contact the nearest Panasonic

Service Centre.)

Ask a professional for fuse replacement.
• Be sure to use the same rated fuse.

No sound

Disable the mute function.
• Verify the wiring.
Wait until the dew disappears before

turning on the unit.

Noise

• Make sure that grounding is established

properly.

No sound from
left, right, front,
or rear speaker

Adjust the balance and fader.
• Verify the wiring.

Left and right
sounds are
reversed

• Connect the speaker lead correctly.

Radio

Frequent noise

Tune in to another station of high-intensity

waves.

• Make sure that the antenna mounted point

is grounded properly.

Preset data
deleted

The preset memory is cleared to return

to the original factory setting when
the power connector or battery is
disconnected.

Error Display Messages (Disc Player)

(The disc is ejected automatically.)

The disc is dirty or upside down.
Check the disc.
(The disc is ejected automatically.)

The disc has scratches.
Check the disc.
No operation by some cause.
If normal operation is not restored,

consult your dealer or the nearest
Service Centre to ask for repairs.

Cannot read the fi le
Check the disc.

A WMA/AAC fi le can be copyrighted.
• The fi le protected by copyright is not

playable.

Trouble

Possible Solution

Trouble

Possible Solution

\CQ-RX400N\ \CQ-RX300N\ \CQ-RX200N\
Note: Refer to the System Upgrade Guidebook for error messages

regarding optional products.

Disc Player

No sound, or disc
is automatically
ejected

Load the disc correctly.
Clean the disc.

Sound skip, poor
sound quality

Clean the disc.

Sound skip due to
vibration

• The maximum permissible tilt angle is

30°.

• Secure the unit.

Disc not ejectable

Press []. If the disc is still not ejected,

contact the nearest Panasonic Service
Centre.

Notes on Discs

N

otes on CD/CD Media (CD-ROM, CD-R, CD-RW)

Printed side

How to hold the disc

• Do not touch the underside of the disc.
• Do not scratch on the disc.
• Do not bend the disc.
• When not in use, keep disc in the case.

Do not use discs that fi t any of the descriptions given
below. Using these discs may damage the discs or cause
the unit to malfunction.

Special discs in a shape which is not round

Partly or wholly transparent disc

Wholly transparent disc

Partly transparent disc

Wholly semi-transparent disc may not be played back.
Discs with adhered labels, etc. on them

Disc with adhered stickers

or tape

Labels created by a printer

Protective fi lms or sheets

Discs accessories (stabilizers,

etc.)

Damaged or deformed discs

Shoddily made discs

Discs with cracks, scratches or

parts missing

Discs with burrs

Please remove the burrs

before use.

Disc Insert

The surfaces of new discs tend to be slippery. Therefore,

when using such a disc for the fi rst time, it may not load

satisfactorily even when it has been inserted into the unit. At

a time like this, insert the disc into the unit as far as it will go

until it is loaded properly.
• When inserting a disc into or ejecting and removing it

from the unit, insert it straight in or eject and remove it
straight out in parallel with the unit.

Observe, the disc may be scratched or marked in the

process.

• When inserting a disc, do not put one disc on another.

Failure to observe this may cause the discs to be
jammed.

Do not leave discs in the following places:

• Direct sunlight
• Near car heaters
• Dirty, dusty and damp areas
• On seats and dashboards

Disc cleaning

• Use a dry, soft cloth to wipe from the center outward.

<Correct>

<Wrong>

• Do not attach any seals or labels to your discs.
• Do not write on the disc label in a heavy pen or ballpoint

pen.

Notes on CD-Rs/RWs

• You may have trouble playing back some CD-R/RW discs

recorded using CD recorders (CD-R/RW drives), either
due to their recording characteristics or dirt, fi ngerprints,
scratches, etc. on the disc surface.

• CD-R/RW discs are less resistant to high temperatures

and high humidity than ordinary music CD. Leaving them
inside a car for extended periods may damage and make
playback impossible.

• The unit may not successfully playback a CD-R/RW,

that was made by the combination of writing software,
a CD recorder (CD-R/RW drive) and a disc if they are
incompatible with one another.

• This player cannot play the CD-R/RW discs if the session is

not closed.

• Be sure to observe the handling instructions of CD-R/RW

discs.

• This player cannot play CD-R/RW discs which contain

other than CD-DA or MP3/WMA/AAC data (Video CD, etc.).

If you use commercial CDs, they must have either of these labels shown at
right.
Some copy-protected music CDs are not playable.

Copyright

It is prohibited by copyright laws to copy, distribute and

deliver copyrighted materials such as music without the

approval of copyright holder except enjoying yourself

personally.

No warranty

Above description complies with our investigations as of

September 2007. It has no warranty for reproducibility and

displayability of MP3/WMA/AAC.

YGFM286051A FT1007-1117

Advertising
This manual is related to the following products: