Paxar Stacker Monarch 932TM User Manual
Page 12
Advertising
5. Tighten the knob.
6. Place the tag weight against the tag stop.
7. Print a test batch of 50 tags. The stacker’s LED is on when
tags are moving through the stacker.
S t e p 6 - S e t t h e B e l t S p e e d .
1. Stack the tags in your hand.
2. Hold the stack against the tag gauge on the tag weight.
If you are using pre-punched or chadless
tags, hold the unpunched part of the tag
against the gauge.
The bar closest to the top of the stack is the number for the
belt adjustment.
Tag Stop
Tag Samples
Pre-punched
Chadless
1-8 Getting Started
Advertising