Philips 19PFL5404/60 - Manual (Page 11)

9
Note
If you cannot locate your remote control and •
want to switch on the TV from standby, press
P/CH +/- or SOURCE at the side of the TV.
Switch channels
Press • P +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the
•
Numeric buttons.
Use the channel
• grid (see ‘Switch
channels with the channel grid’ on page
10 ).
Note
When you use a favourite list, you can only •
select those channels in the list.
4 Use your
product
This section helps you perform basic operations
(see ‘Use more of your product’ on page 11).
Switch your TV on/off or to
standby
To switch on
If the standby indicator is off, press •
POWER at the side of the TV.
If the standby indicator is red, press
•
(Standby-On) on the remote control.
To switch to standby
Press • ( Standby-On) on the remote
control.
The standby indicator switches to red.
»
To switch off
Press • POWER at the side of the TV.
The standby indicator switches off.
»
Tip
Though your TV consumes very little power •
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
English
EN