Philips 19PFL5404/60 - Manual (Page 23)

21
3
Press to enter [Decoder].
4
Press to enter [Channel].
5
Press to select channel number to
map to the decoder/descrambler channel.
6
Press OK.
7
Press to select and enter [Status].
8
Press to select the connector used
by the decoder/descrambler ( [None] or
[EXT 1]).
9
Press OK.
10
Press ( Home) to exit.
Note
Select • [None] if you do not want to map to
the decoder/descrambler channel.
Start a TV demo
1
Press DEMO on the remote control.
2
Press to select a demo and press OK
to view it.
3
Press DEMO to exit.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1
Press ( Home).
2
Select [Setup] > [Installation] > [Factory
settings].
3
Press OK or to enter the [Factory
settings] menu.
» [Reset] is highlighted.
4
Press OK to reset to factory settings.
5
Press ( Home) to exit.
English
EN