Paradyne 392xPLUS - Manual (Page 69)

COMSPHERE 392xPlus Modems
3-32 November 1996 3920-A2-GN31-30
Select Nxt to scroll through the entries in the Active or Skip poll lists.
To exit this function and remain in the PList Display branch, press the key. To exit and return
to the Top-Level menu, press the key.
Clear
The Clear function does not appear in Remote mode.
Clear deletes the modem’s poll list.
To access Clear from the PList branch, make the following selection:
F1
Poll List: >
Display Clear
F2 F3
Select Clear.
The message Command Complete appears on the second line of the LCD to indicate that the poll
list has been cleared.
To exit this function and remain in the PList branch, press the key. To exit and return to the
Top-Level menu, press the key.
Change
The Change function does not appear in Remote mode.
Change allows you to change the modem’s poll list.
To access Change from the PList branch, make the following selections:
F1
Poll List:
Clear
Change
F2 F3
Press the key until Change appears. Select Change.
Change allows you to add modems to the Active poll list (Active), delete modems from both
Active and Skip poll lists (Delete), and move modems from the Active to the Skip poll list.
F1
Poll List:Chang >
Active Delete
F2 F3