Panasonic VW-BN1 - Manual (Page 12)

12
LSQT1268 (ENG)
∫ Connection and recognition
procedures
≥ Connect this unit to the AC adaptor.
1 Connect this unit to the PC.
≥ This unit is recognized as
a [DVD-RAM Drive] on
[My Computer].
≥ Insert the plugs as far as they will go.
The unit and PC will not operate
properly if they are not inserted fully.
≥ Be sure to use the USB cable supplied
with the Camcorder. (We cannot
guarantee operation if you use a USB
cable other than the one supplied with
the Panasonic Camcorder.)
2 Start copying/playback.
≥ Use the software supplied with a
Panasonic Camcorder to copy/play
back the motion video/pictures.
≥ Read the operating instructions of
the software for information about
how to copy/play back.
∫ To disconnect the USB cable
safely
If the USB cable is disconnected while the
access lamp is lit, this unit may malfunction
and the data may be lost.
1 Check that the access lamp is not lit.
2 Double click the ( ) icon in
task tray.
≥ Hardware disconnect dialogue
appears.
≥ Depending on your PC’s settings,
this icon may not be displayed.
3 Select [USB Mass Storage Device]
and click [Stop].
4 Click [OK].
≥ Click [OK], and you can safely
disconnect the cable.
A
AUSB cable
(supplied with the Camcorder)
LSQT1268_Eng.book 12 ページ ２００７年７月２３日 月曜日 午後３時４４分