Philips AJL750/37 - Manual (Page 14)

14
1
To prevent the power cord hanging
down, adjust the length of the power
cord and fasten it into the cable clip.
Connect TV antenna
You can connect the unit to the supplied
antenna or home antenna to receive TV
program.
1
Connect the antenna to the ANTENNA
jack.
Tip
For better reception, connect the unit to •
home antenna.
Install remote control battery
Caution
Danger of explosion if battery is incorrectly •
replaced. Replace only with the same or
equivalent type.
Risk of explosion! Keep batteries away from
•
heat, sunshine or fi re. Never discard batteries
in fi re.
Risk of decreased battery life! Never mix
•
different brands or types of batteries.
Risk of product damage! When the remote
•
control is not used for long periods, remove
the batteries.
Note
Batteries contain chemical substances, they •
should be disposed of properly.
Perchlorate Material - special handling may
•
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Connect power
Caution
Risk of product damage! Ensure that the power •
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock! When you unplug the
•
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure
•
you have completed all other connections.
Note
The type plate is located on the rear of the •
main unit.
1
Connect the AC power cord to the wall
outlet.
Fasten the power cord into cable clip
EN