Panasonic WJ-ND200 - Manual (Page 65)

65
• When any setting has been changed during the down-
load, the download will be canceled automatically. In
this case, the downloaded file is not a complete file
and it is impossible to play it.
• The "ActiveX control" is not installed in the PC. Install
the "ActiveX control" by referring to the following
page.
• When trying to display MPEG-4 images via Internet,
images may not be displayed.
MPEG-4 image display via Internet is affected by the
configurations of the network devices such as a
router. Refer to the network administrator for further
information.
• Are the connected network cameras configured cor-
rectly?
Check the settings of the setup menu ("Camera" -
"NW Camera Setup").
• Are the settings of the setup menu ("Schedule" -
"Program" - "LIVE VIDEO") configured correctly?
Check the settings.
• Are the network settings of the cameras and the unit
configured correctly?
Check the settings of IP address, subnet mask and
default gateway for them.
• When MPEG-4 is selected for the image compression
method of the camera, live images may not be dis-
played in the image display area and black screen will
be displayed for a few minutes in the following cases.
• When frequently checked if the appropriate values
are set for the recording settings (by clicking the
[Measurement] button on the "Program Setup"
window ("Schedule" - "Program")).
• When the settings of the unit are saved repeated-
ly. Wait around 10 minutes without any operations.
The unit will function normally.
Cause/solution
The message "Please Wait."
remains on the screen.
Cannot play the downloaded
image file.
No live image is displayed.
67
–
Refer to the
setup instruc-
tions (PDF).
Refer to the
setup instruc-
tions (PDF).
–
–
Refer to the
setup instruc-
tions (PDF).
Reference
pages
Symptom