Panasonic WJ-ND200 User Manual

Page 66

Advertising
background image

• Are the user ID and the password for the network

camera set correctly?
Check if the user ID and password are set correctly
on the setup menu ("Camera" - "NW Camera Setup").

66

• When logged in with "Limited" user account of

Windows operating system, images will not be dis-
played since the active X control may not be installed
correctly. Log in with "Computer administrator" user
account.

• When the image compression method of all cameras

in use is not the same, performance may become
lower. (Refresh of images will be unstable.)

• The configured settings for transmission rate/record-

ing rate may be beyond the maximum network perfor-
mance.
Lower the value/rate of the settings relating to the net-
work such as the transmission rate, recording rate,
etc.

Reference

pages

Cause/solution

Symptom

• The line speed settings may be not the same between

the unit and the hub, for example, 100M BASE-TX
Full for the unit and 100M BASE-TX half, etc. Some
hubs change the line speed automatically depending
on the network traffic and it may cause configuration
errors. Check the line speed settings of both the unit
and the hub, and configure the line speed settings of
both to conform them.

Refresh of live images is
unstable.

Browser disconnection
sometimes occurs.

Network performance is
poor.

Image file downloaded from
the FTP server is faulty.

Refer to the

setup instruc-

tions (PDF).

• Are the settings of the network camera set correctly?

Check the model of the set camera on the setup
menu ("Camera" - "NW Camera Setup").

• Is "ON" selected for "Enable format button" on the

"Config" page?
When "OFF" is selected, it is impossible to format the
hard disk using the FORMAT button. Check the
"Enable format button" setting on the "Config" page.

Cannot operate the camera.

Refer to the

setup instruc-

tions (PDF).

Refer to the

setup instruc-

tions (PDF).

Refer to the

setup instruc-

tions (PDF).

Live/recording images are
not displayed.

Cannot format the hard disk
using the FORMAT button
inside the front cover.

Advertising