Panasonic DA-PC700 - Manual (Page 21)

Before Using the Scanner
13
1
1.4 Installing the Network Scanner
Utility
The Network Scanner Utility is the software which allows you to access data stored in the mailbox
from a personal computer. This section describes the installation and uninstallation of the Network
Scanner Utility.
1.4.1 Required Environment
To install the Network Scanner Utility, a personal computer must meet all the
following requirements:
Target Operating System
The following operating systems are compatible with the utility:
•
Microsoft Windows 95/98/Me
•
Microsoft Windows NT Version 4.0/Windows 2000
Personal Computer
The target computer must meet all the following requirements:
•
Running an i486DX4/100 MHz processor or above (Pentium 100 MHz or above is
recommended)
•
32 MB memory or more
•
25 MB or more of free hard disk space (not including the space for storing
scanned data)
Network
A personal computer has to be connected to a network and be able to communicate
with the TCP/IP protocol.
Double-click on My Computer, Control Panel, then Network to confirm that the TCP/IP
exists on the menu.
Target Application Software
To import the data stored in the mailbox to an application software, the software
must be compatible with the TWAIN interface.
"Appendix A Compatible Software" for the applications that have been verified to be
compatible with DP-6000/7000.