Panasonic DA-PC700 - Manual (Page 49)

Operating the Client (Personal Computer)
41
3
3.1 Using the Network Scanner Driver
3.1.2 Changing Display of the Scanner Name
You can change the way to display the scanner name on the dialog box.
Click the Change Display on the scanner selection dialog box (see Step
of 3.1.1,
or Step of 3.2.1) to specify the scanner name.
Select the required scanner for which the name is to be changed by following the
procedure below.
Network
If you select Network, the machine will search for the scanner name in the HOSTS
file in \WINDOWS\HOSTS file for Windows 95/98/Me and in
\WINNT\SYSTEM32\DRIVERS\ETC\HOSTS file for Windows NT 4.0/Windows
2000.
If the network scanner is not registered for each of the HOSTS file, the name
registered in the DNS server on the network is displayed.
If the network scanner is not registered in the DNS server or if DNS is not in use,
DP-6000/7000 (IP address)] is displayed.
Local File
Display the scanner name registered in the HOSTS file format in the specified file.
Display DP-6000/7000 (IP address)], if the network scanner is not yet registered in
the specified file or if there are no specified files.