Panasonic KX-PW102CW - Manual (Page 32)

KX-PW101CL/ PW102CW
Main unit
PFQX1709ZA SK0202TU0
Specifications
© Kyushu Matsushita Electric Co., Ltd. 2002
Main unit Hand scanner
Applicable line Public Switch Telephone Network (Tone/Pulse), F-Net, NCC Lines
Max. 252 mm (B4)
Horizontal:8 pels/mm
Vertical: 7.7 lines/mm
20 pages Text (Standard) (*5)
10 pages Text (Fine) (*5)
Approx. A4 1 page (Photo)
320 Ω (*2)
G3 compatible
B4-A5(Max.257 mm in width, Max. 800 mm in length)
252 mm (B4) 208 mm (A4)
202 mm (A4 size plain paper)
Approx. 15 s/page (Original mode) (*3)
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic fallback
64-level
Horizontal: 8 pels/mm
Vertical:
7.7 lines/mm (Fine/Photo), 3.85 lines/mm (Standard)
CCD image sensor
Thermal transfer printing on plain paper
Modified Huffman (MH), Original mode
A4: 210 mm x 297 mm (Plain paper)
Greeting message: Digital recording system (up to 16 sec)
Pre-recording greeting message
ICM Recording: Digital recording system (Approx. 18
min. in total) (*4)
Max. Approx. 46 pages (Only receiving fax etc.) (*5)
Max. Approx. 18 min. (Only Recording message) (*4)
DC resistance
Compatibility
Document size
Effective scanning size
Effective printing size
Transmission time
Modem speed
Halftone level
Scanning density
Scanner type
Printer type
Data compression
system
Recording paper size
Answering device
Memory capacity
After the hand scanner battery has been charged for about 10 hours:
• Successive talk time
:Approx. 90 min.
• Stanby time :Approx. 10 hours
Talk time during power
failure
*1 When copying a 100% black document.
*2 If you cannot make a call due to DC resistance, consult your dealer.
*3 Transmission speed is based on an A4-size document of 700 characters sent in standard resolution at 9,600 bps.
The actual transmission speed depends upon the contents of the page, resolution, telephone line conditions and
capability of the other party’s machine.
*4 If there is a silent pause, the total recording time will be longer.
*5 The memory capacity is based on an A4-size document of 700 characters.
Power supply
Power
consumption
Dimensions
(H x W x D)
Mass
(Weight)
AC 100 V (50 Hz/60 Hz)
Ni-Cd battery
(Part no. KX-FAN37)
DC 2.4 V, 600 mAh
Approx. 181 X 44 X 40 mm
(without projections)
Approx.190
X 44 X 40 mm
(included call/charge
indicater)
Approx. 170 g
(battery installed)
AC adaptor
(Part no. PFAP1009)
AC 100 V (50 Hz/60 Hz)
DC 7.5 V, 100 mA
• Charging:
Approx. 1.1W
• Stand by:
Approx. 0.4W
Approx. 72 X 72 X 90 mm
Approx. 77g
Ni-Cd battery
(Part no. KX-FAN38)
DC 3.6 V, 600 mAh
Approx. 35 X 274 X 81 mm
(without projections)
Approx. 340 g
(battery installed)
Transmission: Approx. 16W
Reception: Approx. 20W
Copy:
Approx. 20W
Stand by: Approx. 1.3W
Maximum(*1): Approx. 125W
Approx. 139 X 344 X 262 mm
(without projections)
Approx. 378 X 344 X 310 mm
(recording paper tray
installed, without projections)
Approx. 3.9 kg
(10 m ink film installed)
Main unit Portable handset Battery charger Hand scanner
Operating
environment
5 °C – 35 °C, 45 % – 85 % RH (Relative Humidity)
KX-PW101CL/
PW102CW
CCD image sensor