Panasonic KX-PW102CW - Manual (Page 6)

6
● The hand scanner battery is charged when the
hand scanner is inserted into the main unit.
Installations and connections
Setting up the hand scanner
2
Slide and open the battery cover by slightly pushing
part.
3
Connect the battery to the hand scanner, and close
the battery cover.
1
Press down the knob of the hand scanner, and pull
out the hand scanner from the main unit.
4
Insert the hand scanner into the main unit.
● Charge the battery for 10 hours after connecting
the power cord to the power outlet.
Imaging sensor
Battery cover
Cord(Red) Connector
Cord(Black)
Display
Bottom side
3
Charge the battery in the charger for 10 hours.
Plug
Charger
AC adaptor
Power outlet
(AC 100 V)
Black Red
Connector
Battery
Click
Battery cover
Charge indicator
–lights apricot (red):
while charging.
–lights off:
charging completed.
Setting up the portable handset
1
2
● After your Panasonic battery is fully charged,
it will last up to about 7 hours of conversation.