Installations and connections, Installing the ink film – Panasonic KX-PW102CW User Manual
Page 4
Advertising
4
Installations and connections
Installing the ink film
2
Insert the ink film.
Insert the white core into the slots shown in the
picture below.
1
Open the control panel.
Find the “T” shaped gear (blue).
Ink film
Insert the blue core into the right slot of the main unit.
Insert the “T” shaped gear (blue) into the left slot of
the main unit.
Blue core
“T” shaped gear (blue)
Right slot
2
3
White core
“T” shaped gear (blue)
Do not be
slacken.
2
Control panel
Press here.
Open the control
panel until it locks.
If the ink film is slack, tighten it by winding the “T”
shaped gear.
3
Close the control panel until it locks.
Advertising