Paxar Monarch AAFES - Manual (Page 11)

Setting Up the Printer 2-1
S E T T I N G U P T H E P R I N T E R
You must configure the printer before printing formats.
The most common configuration options are listed in the following
table:
Option Choices Default
Baud Rate 1200, 2400, 4800, 9600,
19200, 38400, 57600,
115200 19200
Format Sending Mode As Needed/Always As Needed
Separators Enabled/Disabled Disabled
Preloading Enabled/Disabled Disabled
Print Mode
Continuous/On Demand Continuous
Supply Type Black Mark/Die Cut Black Mark
Ribbon With Ribbon/Without Without
S e t t i n g t h e B a u d R a t e
To print, you must change the baud rate setting to 9600 from the
default setting of 19200.
1. Press from the Main Menu. You see
Exit – Are you
sure? Y/N
2. Press Y. You see
MAIN MENU
← Scripts →
3. Press ← or → until you see
MAIN MENU
← Setup →
4. Press Enter. You see
SETUP
Comm 1 →
2