Paxar Monarch AAFES - Manual (Page 7)

Introduction 1-3
Keyboard
Pow er
Printer
Pow er
U n p a c k i n g t h e K i t
After you unpack the kit, you should have the following:
♦ 9416 printer and power supply (24V)
♦ 939i keyboard and power supply (5V)
♦ Adapter cable
♦ AAFES Setup Guide
The power supplies are labeled with the
output voltage: 24V or 5V. The 24V printer
power supply is labeled “Printer.”
The power supplies are not
interchangeable.
1. Pull the long, coiled cable out from the
bottom of the keyboard’s base.
2. Slide the first loop in the cable slot as
shown.
Cable
Slot